Results 21 to 30 of about 4,115 (299)
Extrapolation for Creep-Rupture Strength by Nonlinear Programming.
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 1995 Up to now, various TTP (time-temperature parameter) methods have been proposed to deter. mine creep-rupture strength by extrapolation. The TTP methods based on regression analysis, however, reflect such a general tendency of the regression curve that the estimation accuracy of rupture time is low at the lowest and highest stresses in the test stress ...
Mimaki, Toshitaro +2 more
openaire +2 more sources
Effect of secondary orientation on the creep strength of single crystal of a nickel-based superalloy
Nihon Kikai Gakkai ronbunshu, 2016 The effect of plastic anisotropy, which is caused by the arrangement of slip systems, on the creep strength of notched specimens of Ni-based superalloy single crystal, CMSX4, is described.
Koji KAKEHI
doaj +1 more source
Metals, 2022 The creep response of the 17-4PH precipitation hardening steel produced by a new additive manufacturing technology (Bound Metal Deposition) was investigated at 482 °C (900 °F), under stresses ranging from 350 to 600 MPa.
Valerio Di Pompeo +3 more
doaj +1 more source
A review of experimental studies of creep and creep rupture strength (2004–2021)
Diagnostics, Resource and Mechanics of materials and structures, 2022 The paper reviews studies conducted between 2004 and 2021 for various metal materials (magnesium-lithium alloy, copper, aluminum alloy, titanium alloy, steel, nickel alloy) in the temperature range from 20 to 1100 °C. In those studies the test results were obtained for isothermal creep under uniaxial tension and complex stress.
openaire +1 more source
Creep of High-Strength Steel Coated with Plasma Sprayed Self-Fluxing Alloy
Metals, 2023 This article compares the creep testing behavior of AISI 4340 high-strength steel in the as-received and coated conditions. The coating material used was a NiCrBSi self-fluxing alloy. The microstructural characterization was carried out using optical and
Denison A. Moraes +5 more
doaj +1 more source
The stress-strain state of cylindrical sample from alloy D16T under axial tension and torsion creep
Vestnik Samarskogo Gosudarstvennogo Tehničeskogo Universiteta. Seriâ: Fiziko-Matematičeskie Nauki, 2013 The method for calculation of cylindrical sample rheological deformation and fracture in creep conditions for three types of stress state: tension, pure torsion, the combined effect of tensile load and torque is offered.
Vladimir P Radchenko, Vitaliy V Tsvetkov
doaj +3 more sources
The impression creep Monkman Grant relationship
Ubiquity Proceedings, 2018 Impression creep testing is an established small-scale testing technique in which the indentation rate of a rectangular indenter can be converted into equivalent creep strain rate.
S.J. Brett
doaj +1 more source
Experimental Study on Shear Creep and Long-Term Strength of Clay-Type Muddy Interlayer
Applied Sciences, 2023 In order to have a better understanding of the shear creep characteristics of muddy interlayer in unstable landslides, we took the more “inferior” clay muddy interlayer as the research object, and shear creep experiments under different normal stress ...
Pengzheng Guo +5 more
doaj +1 more source
Creep data sheet for Nickel-based 19Cr-18Fe-3Mo-5Nb-Ti-Al superalloy
Science and Technology of Advanced Materials: MethodsCreep data of Ni-based 19Cr-18Fe-3Mo-5Nb-Ti-Al superalloy (JIS NCF718-B) were obtained at 550°C to 750°C under 100MPa to 1000MPa and analyzed to determine the 100,000 h creep rupture strength.
Kota Sawada +5 more
doaj +1 more source
Influence of normalizing and tempering temperatures on the creep properties of P92 steel
High Temperature Materials and Processes, 2020 P92 steel is used as a piping material in ultra super critical power plants that can be operated at steam temperatures up to 650°C. The changes in the martensitic microstructure of P92 steel must be evaluated thoroughly before it is put into actual ...
Maddi Lakshmiprasad +3 more
doaj +1 more source