Results 51 to 60 of about 2,265,840 (284)
A Miniaturized Autonomous Thermomagnetic Generator
Micro, autonomous and high power thermomagnetic generator operating between a heat dissipator and a processor. ABSTRACT Thermomagnetic generators (TMG) are promising devices for converting low‐grade waste heat into electricity. Self‐actuation using permanent magnets is the key to autonomy.
Morgan Almanza +11 more
wiley +1 more source
Loss estimation is a critical aspect of inverter design.The present work investigates the losses occurring in the DC-link capacitors of the three-phase three-level neutral point clamped and cascaded H-Bridge inverter topologies, by performing a harmonic ...
Sharkh, S. M. +2 more
core +2 more sources
The APTES linker establishes a permanent interfacial dipole, reducing the work function of n‐GaN from 3.55 to 3.29 eV. This strengthens the built‐in electric field, significantly accelerating hole extraction to drive the oxygen evolution reaction (OER). Ultimately, this tailored charge‐separation architecture achieves a remarkable 4.78‐fold enhancement
Jeong‐Kyun Oh +15 more
wiley +1 more source
Loss comparison of 2 and 3-level inverter topologies
This paper investigates semiconductor and DC-link capacitor losses in two two-level and two three-level voltage source inverters. The components of the four inverters are selected to have appropriate voltage and current ratings.
Orfanoudakis, G. +3 more
core +1 more source
An ultrathin nanocomposite MXene‐based multilayer effectively blocks hydrogen permeation by presenting a tortuous, layered structure. When the MXene is layered with reduced graphene oxide modified with a polycation, the resulting nanocomposite retains its hydrogen gas barrier properties at temperatures as high as 400°C (permeability of 7.13 ± 0.09 × 10−
Yang Hyun Auh +6 more
wiley +1 more source
Active voltage balancing of DC-link electrolytic capacitors
DC voltage links of three-phase power converters are frequently equipped with a series connection of two electrolytic capacitors because of high voltage level. For such a configuration, usually resistors have to be arranged in parallel to each capacitor in order to balance the partial voltages. These balancing resistors, however, have to be dimensioned
H. Ertl, T. Wiesinger, J.W. Kolar
openaire +1 more source
Single‐crystalline LaOCl and GdOCl form atomically abrupt, Cl‐terminated interfaces with MoS2, enabling near‐ideal switching and suppressed flicker noise. Carrier‐number‐fluctuation analysis yields effective noise‐derived interface trap densities of 1.15–1.94 × 1010 cm−2 eV−1, approaching hexagonal boron nitride levels with high‐κ coupling.
Chanho Lee +10 more
wiley +1 more source
Reliability improvement of the Photovoltaic (PV) inverter has a high potential for reducing the cost of PV energy. The DC-link capacitor is one of the main components influencing the reliability of PV inverter systems. Various pulse-width modulation (PWM)
Jae-Heon Choi +2 more
doaj +1 more source
A novel nonlinear infrasound sensor concept based on a free‐standing ion conductive gel membrane is introduced. Acoustic signals are directly transduced into an electrical signal using an internal application mechanisms (gating). The nonlinearity might be used for neuromorphic in‐sensor computing. ABSTRACT Measuring low‐frequency or infrasound acoustic
Maarten Mittmann +6 more
wiley +1 more source
Digitally Printed Eco‐Friendly Electronic Devices
Fabrication of electronics using eco‐friendly materials through digital printing routes is a promising strategy for improving life cycle sustainability and reducing the environmental impacts of conventional manufacturing. This review highlights state‐of‐the‐art eco‐friendly materials, green ink formulations, various resource‐efficient digital printing ...
Nitheesh M. Nair +5 more
wiley +1 more source

