Results 1 to 10 of about 216,780,192 (300)

Experimental research on the instantaneous and long-term deflections of pre-cracked concrete beams enhanced by carbon fibre reinforced polymer [PDF]

open access: yesFracture and Structural Integrity, 2018
This paper aims to disclose the influence law of cracks on instantaneous and long-term deflections of reinforced beam. For this purpose, four concrete beams were created, pre-loaded to varied degrees of cracking, and reinforced with carbon fibre ...
Shiyong Jiang, Shijuan Wu, Weilai Yao
doaj   +5 more sources

Feasibility of ultra-low-field MRI in an ion beam treatment room for online MR-guided particle therapy [PDF]

open access: yesPhysics and Imaging in Radiation Oncology
Background and purpose:: Online MR-guided particle therapy may improve beam delivery precision and treatment efficacy. Ultra-low-field (ULF) MRI may enable image guidance with minimal modification of existing facilities.
Julia Pfitzer   +4 more
doaj   +2 more sources

On the Derivation of Exact Solutions of a Tapered Cantilever Timoshenko Beam [PDF]

open access: yesCivil Engineering Dimension, 2019
A tapered beam is a beam that has a linearly varying cross section. This paper presents an analytical derivation of the solutions to bending of a symmetric tapered cantilever Timoshenko beam subjected to a bending moment and a concentrated force at the ...
Foek Tjong Wong   +4 more
doaj   +3 more sources

The stiffness of a reinforced concrete beam with random parameters the cracks formation [PDF]

open access: yesE3S Web of Conferences, 2023
The work of a reinforced concrete beam lying on an elastic foundation is considered, the deformation characteristics of which are described by a model with two Vlasov-Pasternak bed coefficients.
Deminov Pavel
doaj   +1 more source

Multiple Time-Scales Analysis to Predict the Quasiperiodic Oscillatory Response of a Thin-Walled Beam Subjected to 1:1:1 Simultaneous Resonance

open access: yesShock and Vibration, 2023
This paper introduces a study on the horizontal and vertical deflections of the cross section of a thin-walled rotating beam. These deflections are governed by a system of two ordinary differential equations in order to describe their Cartesian ...
Ali Kandil   +3 more
doaj   +1 more source

Operation of pre-stressed span beams of bridge cranes taking into account load combinations

open access: yesTrudy Odesskogo Politehničeskogo Universiteta, 2022
The paper considers issues related to increasing the bearing capacity of span beams of bridge cranes by means of pre-stressing. It is known that the work of the span structure of the crane with pre-stressed beams takes place under the same conditions ...
Анатолій Вікторович Ткачьов   +2 more
doaj   +5 more sources

Maximum Stress Estimation Model for Multi-Span Waler Beams with Deflections at the Supports Using Average Strains

open access: yesSensors, 2015
The safety of a multi-span waler beam subjected simultaneously to a distributed load and deflections at its supports can be secured by limiting the maximum stress of the beam to a specific value to prevent the beam from reaching a limit state for failure
Sung Woo Park   +2 more
doaj   +1 more source

Mechanical behavior of 2D FGP beam with uneven porosity distribution

open access: yesJournal of Architectural and Engineering Research, 2023
This study gives the mechanical behavior of 2D functionally graded porous (FGP) beams using the finite element method. The Matlab code with simple Timoshenko beam elements is written to solve 2D FGP beam problems under distributed load.
Lan Hoang That Ton
doaj   +1 more source

A correction method for large deflections of cantilever beams with a modal approach [PDF]

open access: yesWind Energy Science, 2023
Modal-based reduced-order models are preferred for modeling structures due to their computational efficiency in engineering problems. One of the important limitations of the classic modal approaches is that they are geometrically linear.
O. Gözcü, E. Barlas, S. Dou
doaj   +1 more source

Analysis of influence of random distribution of assembly clearance on deflection and load capacity of folding beams [PDF]

open access: yesBiuletyn Wojskowej Akademii Technicznej, 2018
The article includes the analysis of influence of random distribution of assembly clearance of various sizes on deflections and the load capacity of the folding beam based on fixed supports.
Jan Marszałek, Mieczysław Piechota
doaj   +1 more source

Home - About - Disclaimer - Privacy