Results 1 to 10 of about 1,861 (307)
To date, the AC dielectric breakdown strength of polyimide (PI) films, as for most polymers, is understood to follow a thickness dependency with a measured power law exponent, n ≈ 0.5. However, this work experimentally demonstrates that the AC dielectric
Sombel Diaham +3 more
doaj +2 more sources
Charge migration of multilayer oil paper on the process of partial discharge under AC voltage
As one of the main reasons for the deterioration of Nomex paper and charge migration, partial discharge (PD) plays a critical role during PD degradation. In this study, the PD characteristics of multilayer oil paper are focused on.
Bo Gao +5 more
doaj +1 more source
Effect of adding nanofillers on transformer oil breakdown voltage and its thermal performance finds a great interest from researchers and scientists.
Mohamed E. Ibrahim +4 more
doaj +1 more source
Optimization of Electricity Consumption using Dielectric Barrier Discharge Method (DBD)
Dielectric Barrier Discharges (DBDs) are self-sustaining electrical discharges in electrode configurations containing an insulating material in the discharge path.
Noushin Dadashzadeh
doaj +1 more source
Considering that the working temperature is much higher in high‐voltage direct‐current (HVDC) convert transformers than in conventional AC transformers, the combination of thermally upgraded paper and natural ester might be a better choice to withstand ...
Runhao Zou +4 more
doaj +1 more source
Ageing of DC conduction in thermally aged oil‐impregnated pressboard
Ageing of the conduction process in a dielectric allows a better understanding of the phenomena. Available literature shows that the DC conductivity of oil impregnated pressboard increases with applied electric stress, particularly above 40 °C.
Nasirul Haque +3 more
doaj +1 more source
In this research, the authors concentrated on a rarely studied part in the power transformer's insulation structure: the connection part of radial and axial spacers. An experimental model was constructed to simulate this part.
Li Lu +2 more
doaj +1 more source
Interfacial breakdown between dielectric surfaces determined by gas discharge [PDF]
This paper examines the influence of the elastic modulus and applied contact pressure on the tangential AC breakdown strength (BDS) of polymer solid-solid interfaces theoretically and experimentally. In the experiments, three different materials with different elastic moduli, namely cross-linked polyethylene (XLPE), cured end product of epoxy resin ...
Kantar, Emre +3 more
openaire +2 more sources
The high frequency PWM voltage pulses from a two-level six-switch inverter produce a common-mode voltage in an electric machine’s windings, a fraction of which appears on the machine shaft due to electrostatic (capacitive) coupling.
Ryan Collin +2 more
doaj +1 more source
Plasma electrolytic oxidation of metals [PDF]
In this lecture results of the investigation of plasma electrolytic oxidation (PEO) process on some metals (aluminum, titanium, tantalum, magnesium, and zirconium) were presented.
Stojadinović Stevan
doaj +1 more source

