Results 1 to 10 of about 30,233 (313)

Transition Process from Diffuser Stall to Stage Stall in a Centrifugal Compressor with a Vaned Diffuser [PDF]

open access: yesInternational Journal of Rotating Machinery, 2017
The transition process from a diffuser rotating stall to a stage stall in a centrifugal compressor with a vaned diffuser was investigated by experimental and numerical analyses. From the velocity measurements, it was found that the rotating stall existed
Nobumichi Fujisawa, Yutaka Ohta
doaj   +2 more sources

Unsteady behavior and mechanism of a rotating stall in a centrifugal compressor with vaneless diffuser

open access: yesNihon Kikai Gakkai ronbunshu, 2021
Unsteady diffuser stall behavior in a centrifugal compressor with a vaneless diffuser was investigated by experimental and computational analyses. The diffuser stall generated as the mass flow rate decreased. The diffuser stall cell rotated at 25-30 % of
Nobumichi FUJISAWA   +3 more
doaj   +1 more source

Diffuser Total Efficiency Using Generalized Actuator Disc Model and Its Maximization Method

open access: yesEnergies, 2021
The diffuser total efficiency was formulated and defined based on the generalized actuator disc model for the index of the efficiency of the diffuser-alone of the diffuser-augmented wind turbines.
Shigeo Yoshida   +3 more
doaj   +1 more source

Research Status of Gas Turbine Exhaust Diffuser

open access: yes发电技术, 2021
Gas turbine is the important equipment used in security and economic field of the country. The aerodynamic performance of exhaust diffuser has an important influence on the thermodynamic efficiency of gas turbine. The flow interaction between the exhaust
Bin QIU, Jinglun FU
doaj   +1 more source

Effect of space diffuser on flow characteristics of a centrifugal pump by computational fluid dynamic analysis.

open access: yesPLoS ONE, 2020
Achieving an optimal configuration of the diffuser is indispensable for high pump performances. In this work, a numerical study on diffuser configuration is conducted for a high pump performance using a computational fluid dynamics code, and the effects ...
Ying-Yuan Liu   +4 more
doaj   +1 more source

Numerical Study on the Flow and Heat Transfer Characteristics of a Second Throat Exhaust Diffuser According to Variations in Operating Pressure and Geometric Shape

open access: yesEnergies, 2021
A numerical study was conducted to investigate the flow and heat transfer characteristics of a supersonic second throat exhaust diffuser for high-altitude simulations. The numerical results were satisfactorily validated by the experimental results.
Seonghwi Jo   +3 more
doaj   +1 more source

Numerical Investigations at High Altitudes for Nozzles Performance Monitoring

open access: yesJISR on Computing, 2023
Large area ratio nozzles that are employed for space propulsion applications are not meant to be tested at the ground- level conditions because of the flow conditions that occur in their divergent section due to their low exhaust pressures.
Nauman Qureshi
doaj   +1 more source

The influence of the last stage blades swirl to the efficiency of «stage-diffuser» unit of stationary GTU

open access: yesИзвестия высших учебных заведений: Проблемы энергетики, 2021
THE PURPOSE. Determination of the optimal law of swirling of the blades of the last stage of a stationary GTU. Due to the specificity of its operating conditions - in a system with a diffuser - the traditional laws of swirling lead to a non-optimal flow ...
L O. Vokin   +2 more
doaj   +1 more source

Experimental Study of Pre-evacuation Effect on Second throat Diffuser Starting Process [PDF]

open access: yesعلوم، فناوری و کاربردهای فضایی, 2022
In the present study, the effect of pre- evacuation on starting process of a second throat exhaust diffuser has been investigated experimentally by examining a thrust optimized parabolic nozzle.
Nematollah Fouladi   +2 more
doaj   +1 more source

Metamaterials simulation for thermal diffusers

open access: yesEPJ Applied Metamaterials, 2022
The heat extraction efficiency of a cylindrical diffuser can be optimized by applying differential geometry [J.-P. Huang, Theoretical Thermotics: Transformation Thermotics and Extended Theories for Thermal Metamaterials (Springer, 2020)], in order to ...
Nuñez-Betancourt Luis Alfonso   +1 more
doaj   +1 more source

Home - About - Disclaimer - Privacy