Results 221 to 230 of about 3,127,055 (267)
High‐Temperature Oxidation of the CrFeNi Medium‐Entropy Alloy
Advanced Engineering Materials, EarlyView.The oxidation behavior of equiatomic CrFeNi MEA is a key issue that determines this material's suitability for high‐temperature application. The understanding of long‐term behavior is even more crucial than short‐term corrosion effects. The alloy is exposed to synthetic air at 1000, 1050, and 1100 °C for 24, 100, and 1000 h and systematically compared ...
Anna Maria Manzoni +5 more
wiley +1 more source
Residual Stress States in Microstructurally Graded PBF–LB/M Austenitic Steel Components
Advanced Engineering Materials, EarlyView.This study examines microstructurally graded 316L rectangular tube profiles fabricated via PBF–LB/M using a dual‐laser system. A 1 kW top‐hat and a 400 W Gaussian laser create distinct grain sizes and crystallographic texture. Mechanical properties are linked to microstructural evolution driven by processing conditions.
Nico Möller +5 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.This study investigates the influence of ceramic fillers—aluminum oxide, boron nitride, and a combination of aluminum oxide and zinc oxide—with different particle sizes, on the thermal conductivity of solid silicone rubber. Additionally, the impact of potential synergistic interactions from the simultaneous addition of selected fillers is explored to ...
Aryan Oktaee +3 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.This study designs Ta–Mo–Cr–Ti–Al refractory high‐entropy alloys with a disordered body‐centered‐cubic A2 crystal structure aiming for improved ductility, lower density, and oxidation resistance. Four alloy compositions are identified by thermodynamic calculations.
Kateryna Khanchych +7 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.The fused filament‐fabricated MAR‐M247 alloy without hot isostatic pressing shows the lowest porosity of 4%. Heat treatment at 1220 °C produces coarse precipitates and carbides. Specimens heat‐treated at 1220 °C exhibit higher tensile strength (683 MPa) and elongation (10%) at room temperature.
Haneen Daoud +7 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.This work reveals the phase composition and quantitative morphology analysis of precipitation‐hardened Fe32Cu12Ni11Ti16Al29 complex‐concentrated alloy. The precipitates are shown to have a high coherency. Morphology transition between sphere, cuboidal, and elongated morphology is observed. Finally, the overaging behavior is captured using microhardness.
Rostyslav Nizinkovskyi +4 more
wiley +1 more source
Diffusion relations of urea, inulin and chloride in some mammalian tissues1
, 1942 E. J. Conway, Oliver FitzGerald
openalex +1 more source
Advanced Engineering Materials, EarlyView.Experiments for reinforcing the diffusion bonding plane by the oxide dispersion strengthening effect are presented. Small ceramic particles (0.5 and 50 μm, respectively) are incorporated. Furthermore, ceramic particles help to penetrate stable passivation layers, enabling atomic diffusion across bonding planes. Since a ceramic–metallic interface cannot
Thomas Gietzelt +4 more
wiley +1 more source
Advanced Engineering Materials, EarlyView.The influence of Hot Isostatic Pressing (HIP) temperature on the microstructure and creep performance of powder bed fusion–laser beam processed CM247LC superalloy is investigated. Grain growth and γ’ precipitate evolution are characterized following HIP at varying temperatures.
Ahmed Fardan +4 more
wiley +1 more source