Results 11 to 20 of about 19,158 (261)
Partial combustion is applied for tar reduction in the gasified-gas of woody biomass. An inverse diffusion flame was formed in partial-combustion-type gas reformer.
Zhiren BAI +3 more
doaj +1 more source
Oxygen combustion of CH4-CO2 mixture in a small-scale counterflow burner
Oxygen combustion of CH4-CO2 mixture in a small-scale counterflow burner was studied. A diffusion flame was stabilized in the gap between opposed ports ejecting fuel and oxygen gases, and its thickness which depended on the gap distance between burner ...
Satoshi KADOWAKI +5 more
doaj +1 more source
In this paper, a large-eddy simulation (LES) of turbulent non-premixed LO2/CH4 combustion under transcritical conditions is performed based on the Mascotte test rig from the Office National d’Etudes et de Recherches Ae´rospatiales (ONERA), and the aim is
Siyuan Wang +3 more
doaj +1 more source
Characteristics of biogas-oxygen micro counterflow diffusion flames
The characteristics of biogas-oxygen diffusion flames were experimentally investigated using small counterflow burners, where the apparent equivalence ratio was set to unity.
Satoshi KADOWAKI +3 more
doaj +1 more source
Study on flame stability in oxygen-enriched ammonia/N2/O2 laminar diffusion flame
Ammonia is regarded as one of the alternative fuels because CO2 is not emitted during the combustion process of ammonia. The physical properties of ammonia are suitable for transportation and storage as a “hydrogen carrier”.
Yohei ISHIKAWA +6 more
doaj +1 more source
Optical temperature measurement of small droplet array luminous flame in butane diffusion flame
Two color ratio method was applied to measure temperature distributions of a luminous diffusion flame. A small blue butane diffusion flame, 3mm in flame diameter, was used.
Hiroshi ENOMOTO +4 more
doaj +1 more source
Relative assessment of single-tube and multi-tube inverse diffusion flame for thermal and emission c
The thermal and emission characteristics of multi-tube inverse diffusion flame is investigated and compared with single-tube inverse diffusion flame. Liquefied petroleum gas is used as a fuel.
Mayur VADOLIYA +2 more
doaj +1 more source
An optical method for measuring soot volume fraction, flame temperature, and concentration of combustion products in a diffusion flame based on time-division multiplexed tunable diode laser absorption spectroscopy technique is presented in this article ...
Haibin Cui +4 more
doaj +1 more source
An experimental study on coflow diffusion combustion in a pellet-packed bed with different bed lengths [PDF]
In experimental investigations on axial symmetry, over-ventilated CH4/air diffusion combustion in a packed bed is executed to study the height, shape and stability of the flame.
Junrui Shi +6 more
doaj +1 more source
In this study, the mixed diffusion flame soot of methane, ethylene and hydrogen were studied, and the two-dimensional light extinction measurement was applied to investigate the distribution characteristics of the ethylene flame soot concentration with ...
Yuhan Zhu +4 more
doaj +1 more source

