Results 71 to 80 of about 115,864,024 (289)

Investigating the Effect of Inclination Angle and the Influence of Scan Parameters on the Appearance and Thermal and Mechanical Properties of Filigree Tension Rods of LPBF‐Manufactured NiTi Shape‐Memory Alloys

Advanced Engineering Materials, EarlyView.
This article investigates the dependence of the properties on the manufacturing orientation in the form of the inclination angle to the build plate of LPBF‐fabricated NiTi rods with a diameter of 150–220 µm. Metallographic, chemical, thermal, and mechanical characterization show behavior under identical manufacturing conditions that ranges from ...
Sandra Herzig, Michael Werner, Christian Rotsch   +2 more
wiley   +1 more source

Controlling Grain Growth in Powder Bed Fusion of Yttria‐Stabilized Zirconia Using Femtosecond Lasers: Challenges and Methodological Insights

Advanced Engineering Materials, EarlyView.
Binder‐free laser powder bed fusion of 8YSZ with a femtosecond laser is used to map process windows linking scan strategy, heat accumulation, and grain growth. Time‐resolved thermography and simulations reveal thermal regimes that enable continuous, vitrified, and fine‐grained 8YSZ surface layers without absorptive additives and demonstrate ...
Markus Kühn, Sarah Kaden, Andrea Barz, Daniel Störzner, Jens Bliedtner, Andrés Fabián Lasagni   +5 more
wiley   +1 more source

DSP-Enhanced Analog-to-Digital Conversion for High-Speed Data Centers' Optical Connectivities

IEEE Photonics Journal, 2015
As data centers evolve to sustain the economic scale in network traffic, optical interconnections are adapted to support the vast amount of capacity requirements.
Yaron Yoffe, Dan Sadot
doaj   +1 more source

Mitigating Creep Anisotropy and Enhancing Performance in Additively Manufactured Ni‐Based Superalloys: A Review

Advanced Engineering Materials, EarlyView.
Additive manufacturing introduces pronounced microstructural and crystallographic anisotropy in Ni‐based superalloys, resulting in orientation‐dependent creep deformation and damage. This review identifies the key microstructural origins of creep anisotropy, examines their influence on dominant deformation mechanisms, and highlights processing ...
Chandan Kumar, Shobhit Pratap Singh, Gaurav Mohanty, Praveen Kumar   +3 more
wiley   +1 more source

Analog-to-digital conversion

, 2010
The design of an analog-to-digital converter or digital-to-analog converter is one of the most fascinating tasks in micro-electronics. In a converter the analog world with all its intricacies meets the realm of the formal digital abstraction.
Pelgrom, Marcel J M
core  

Learning Task-Based Analog-to-Digital Conversion for MIMO Receivers

, 2020
Analog-to-digital conversion allows physical signals to be processed using digital hardware. This conversion consists of two stages: Sampling, which maps a continuous-time signal into discrete-time, and quantization, i.e., representing the continuous ...
Shlezinger, Nir, Eldar, Yonina C., Nir Shlezinger, Ruud J. G. van Sloun, van Sloun, Ruud J.G.; id_orcid, Georgee Tsintsadze, Tsintsadze, Georgee, Iris A. M. Huijben, Huijben, Iris; id_orcid, Yonina C. Eldar   +9 more
core   +1 more source

All‐in‐One Analog AI Hardware: On‐Chip Training and Inference with Conductive‐Metal‐Oxide/HfOx ReRAM Devices

Advanced Functional Materials, EarlyView.
An all‐in‐one analog AI accelerator is presented, enabling on‐chip training, weight retention, and long‐term inference acceleration. It leverages a BEOL‐integrated CMO/HfOx ReRAM array with low‐voltage operation (<1.5 V), multi‐bit capability over 32 states, low programming noise (10 nS), and near‐ideal weight transfer.
Donato Francesco Falcone, Victoria Clerico, Wooseok Choi, Tommaso Stecconi, Folkert Horst, Laura Bégon‐Lours, Matteo Galetta, Antonio La Porta, Nikhil Garg, Fabien Alibart, Bert Jan Offrein, Valeria Bragaglia   +11 more
wiley   +1 more source

Printed Integrated Logic Circuits Based on Chitosan‐Gated Organic Transistors for Future Edible Systems

Advanced Functional Materials, EarlyView.
Edible electronics needs integrated logic circuits for computation and control. This work presents a potentially edible printed chitosan‐gated transistor with a design optimized for integration in circuits. Its implementation in integrated logic gates and circuits operating at low voltage (0.7 V) is demonstrated, as well as the compatibility with an ...
Giulia Coco, Valerio Francesco Annese, Valerio Galli, Ilaria Penna, Debora Russo, Marina Veronesi, Rita Scarpelli, Stefania Sabella, Mario Caironi   +8 more
wiley   +1 more source

FEATURES OF ANALOG-TO-DIGITAL CONVERSION IN MULTIPLE ELECTROCARDIOSIGNAL RECORDING SYSTEM

Измерение, мониторинг, управление, контроль
Background. Digitalization of medical information is the main physical process that determines the characteristics of medical information systems. Digital tools of modern medicine allow for breakthroughs in the very approach to treatment and prevention ...
A.Yu. Bodin, O.N. Bodin, M.N. Kramm
doaj   +1 more source

Rail to Rail ICMR and High Performance ULV Standard-Cell-Based Comparator for Biomedical and IoT Applications

IEEE Access
In this paper a novel ultra-low voltage (ULV) standard-cell-based comparator which provides rail-to-rail input common-mode range (ICMR) is presented. The topology, unlike the others in the literature, uses only 2-inputs NAND gates and is able to operate ...
Riccardo Della Sala, Francesco Centurelli, Giuseppe Scotti, Gaetano Palumbo   +3 more
doaj   +1 more source