Results 61 to 70 of about 10,351 (283)
Alloy Qualification for Producing Quench and Tempered Plate Steels with Extra‐Heavy Gage
steel research international, EarlyView.This study develops alloy concepts for ultraheavy steel plates (>100 mm) with ≥690 MPa yield strength. Through dilatometry and Jominy testing, the effects of Mo, Ni, and B on hardenability are quantified. A synergy between 0.5% Mo and 0.5%–1.0% Ni ensures core strength at low cooling rates, while boron microalloying suppresses ferrite and promotes ...
Xabier Azpeitia +5 more
wiley +1 more source
Structure and properties of the equiatomic CuAu alloy ordered under a tensile stress of 40MPa
Frontier Materials & TechnologiesOne of the key challenges in materials science is the search for methods to control the structure and properties of various materials.
Polina O. Podgorbunskaya +3 more
doaj +1 more source
Cerâmica, 2000 Nos últimos anos vem sendo testados óxidos de terras raras pesadas como aditivos de sinterização, via fase líquida, do nitreto de silício (Si3N4). Este trabalho visou o estudo do comportamento da sinterização do Si3N4 aditivado com um concentrado de ...
S. Ribeiro +2 more
doaj +1 more source
The influence of a cooling rate on the evolution of microstructure and hardness of the steel 27MnCrB5 [PDF]
, 2018 The aim of the performed experiments was to determine the influence of a cooling rate on the evolution of microstructure and hardness of the steel 27MnCrB5.
Kawulok, Petr +7 more
core +1 more source
In Situ Alloying of H13 Tool Steel With TiC via PBF‐LB/M
steel research international, EarlyView.H13 tool steel is in situ alloyed with titanium carbides (TiC) in amounts up to 30 wt.%. This approach offers the advantage that the carbides melt only partially during processing, preventing excessive carbon enrichment of the steel matrix. The resulting microstructure consists of coarse, undissolved and fine, reprecipitated carbides, leading to grain ...
Oliver Bürgi +2 more
wiley +1 more source
Journal of Manufacturing and Materials ProcessingFused Filament Fabrication (FFF) is a low-cost additive manufacturing process that produces metallic parts from printing with a metal-polymer filament, followed by a debinding–sintering process.
Morgane Mokhtari +5 more
doaj +1 more source
Strain Analysis of Initial Stage Sintering of 316L SS Three Dimensionally Printed (3DP TM) Components [PDF]
, 2004 Mechanical ...
Anderson, Rhonda +3 more
core +1 more source
The measurement of volume change by capillary dilatometry [PDF]
Protein Science, 2019 AbstractCapillary dilatometry enables direct measurement of changes in volume, an extensive thermodynamic property. The results provide insight into the changes in hydration that occur upon protein folding, ligand binding, and the interactions of proteins with nucleic acids and other cellular components. Often the entropy change arising from release of
openaire +2 more sources
Exploiting Residual Elements Arising from Scrap Steel in Future Sustainable Steel Alloy Design
steel research international, EarlyView.Herein, the effects of residual elements Cu and Sn on grain growth, recrystallization, and phase transformation in C–Mn steel are summarized, and a case study is presented on how the presence of residual elements can be exploited to reduce deliberate Nb microalloying while achieving the same grain size control and strength during thermomechanical ...
Claire Davis +5 more
wiley +1 more source
MetalsDilatometry was used to simulate and analyze martensite formation in the grain-coarsened heat-affected zone (GCHAZ) of P91 steel for high inter-pass temperatures during multi-pass welding.
Druce Dunne, Huijun Li, Elena Pereloma
doaj +1 more source