The Analysis of Dissimilar Metal Weld Joints
Presented paper deals with the exhaust system parts manufacturing processes. The welded specimens of stainless steel, mild steel and combined stainless-mild steel specimens were made and tensile tests were carried out. Finite element model for the parametric analysis was developed.
Chinnappashanmugam, Vijay Ramachandhar +7 more
openaire +3 more sources
Using Taguchi method to optimize welding pool of dissimilar laser welded components [PDF]
In the present work CO2 continuous laser welding process was successfully applied and optimized for joining a dissimilar AISI 316 stainless steel and AISI 1009 low carbon steel plates. Laser power, welding speed, and defocusing distance combinations were
Anawa, E., Olabi, Abdul-Ghani
core +2 more sources
Laser Welding of TA15 Titanium Alloy and Inconel 718 Dissimilar Metals [PDF]
This paper studied the effect of laser welding technology on dissimilar metal welding joints of TA15 titanium alloy and Inconel 718 nickel-based alloy.
Qi An, Dongting Wu, Peng Liu, Yong Zou
doaj +1 more source
The effect of material position of multi-pass friction stir processing on friction stir welded AA1050/AA6082 dissimilar joints [PDF]
The AA1050 and AA6082 plates were used in producing dissimilar joint through friction stir welding (FSW) technique. The developed dissimilar joint was then subjected to multi-pass friction stir processing (FSP) technique.
Muribwathoho Oritonda +3 more
doaj +1 more source
Tegangan Ambang pada Sambungan Las CDW antara Baja dan Kuningan dalam Lingkungan Korosif
Failure at the welded joint can be occurs due to the Stress Corrosion Cracking (SCC) phenomenon. Dissimilar welding is more susceptible to SCC when compared to similar welding.
Osmar Buntu Lobo +2 more
doaj +1 more source
High-pressure linear friction welding of dissimilar AA5052-H34 and AA6061-T6 joint
Dissimilar linear friction welding (LFW) of AA5052/AA6061 was performed at different applied pressures. A dissimilar joint obtained at a high applied pressure of 200 MPa exhibited a tensile strength equivalent to that of the AA5052 base material, mainly ...
Jeong-Won Choi +5 more
doaj +1 more source
Study on Laser Overlap Welding of Titanium/Aluminum Dissimilar Metals Based on Niobium Microalloying
Brittle intermetallic compounds, formed during the welding process of titanium/aluminum (Ti/Al), lead to a significant reduction in joint mechanical properties.
Hao Pan +5 more
doaj +1 more source
Feasibility and optimization of dissimilar laser welding components [PDF]
Demands placed on dissimilar metals joints have increased from various viewpoints, such as, environmental concerns, energy saving, high performance, cost saving and so on.
Hassan, Ezzeddin Mohamed
core +2 more sources
This paper addresses the metallurgical and mechanical characterization of dissimilar joints made by laser autogenous welding between thin sheets of low-carbon steel (CS) and austenitic stainless steel (SS).
Elena Scutelnicu +4 more
doaj +1 more source
Direct keyhole laser welding of aluminum alloy AA5754 to titanium alloy Ti6Al4V [PDF]
The tensile strength of direct AA5754/Ti6Al4V joints performed by high speed Yb:YAG laser welding is found to be determined by morphology and phase content of dissimilar interface formed between contacting Al-rich and Ti-rich melted zones. Three types of
CICALA, E +6 more
core +1 more source

