Results 41 to 50 of about 1,725,599 (201)
Dissimilar metal joining between Al and Cu is effective for reducing the weight and cost of electrical components. In this study, dissimilar lap joining of pure Al to pure Cu with an Al-Ni filler material was conducted using tungsten inert gas (TIG) arc ...
Hiroki S. Furuya +3 more
doaj +1 more source
Numerical modelling on cooling assisted friction stir welding of dissimilar Al-Cu joint
Cooling assisted friction stir welding (CFSW) suppresses formation of intermetallic compounds (IMCs) and improves tensile strength of the dissimilar joints.
Singh Dhari, R +9 more
core +1 more source
Rotary friction welding is a highly effective solid-state technique for joining dissimilar materials, which offers the potential for significant weight reduction without compromising strength.
Neeraj Kumar Mishra +3 more
doaj +1 more source
The most effective method to reduce CO2 gas emission from the steam power plant is to improve its performance by elevating the steam temperature to more than 700 °C. For this, it is necessary to develop applicable materials at high temperatures. Ni-based
Hafiz Waqar Ahmad +3 more
doaj +1 more source
FEM Simulation and Experimental Tests on the SMAW Welding of a Dissimilar T-Joint
Residual stresses induced by the welding processes may, in some cases, result in significant warping and distortions that can endanger the integrity of the welded structures.
Raffaele Sepe +3 more
doaj +1 more source
Friction stir welding (FSW) was used to fabricate a dissimilar joint (Joint 2#) between plates of the new Al-Zn-Mg-Sc-Zr alloy and the Al-Mg-Si alloy.
Fan Zhou +4 more
doaj +1 more source
Creep behavior and in-depth microstructural characterization of dissimilar joints
The 700 °C power plants currently under development will utilize Ni-base alloys such as alloy 617 for components to be operated at temperatures >650 °C. Due to economic reasons for components or parts of components which are subjected to temperatures
Kauffmann, F +3 more
openaire +3 more sources
Thermal autofrettage of dissimilar material brazed joints [PDF]
This paper presents a study on the effects of thermal autofrettage on the residual stresses in a Titanium – Copper brazed joint. It is shown that cryogenic thermal autofrettage has the potential to alter the residual stress field due to joining, in a manner that should result in an improvement in the subsequent operational fatigue performance of ...
Hamilton, Niall Robert +5 more
openaire +3 more sources
Microstructure and Mechanical Properties of Friction Welding Joints with Dissimilar Titanium Alloys
Titanium alloys, which are important in aerospace application, offer different properties via changing alloys. As design complexity and service demands increase, dissimilar welding of the titanium alloys becomes a particular interest.
Yingping Ji, Sujun Wu, Dalong Zhao
doaj +1 more source
Rotary Friction Welding and Dissimilar Metal Joining of Aluminium and Stainless Steel Alloys
Friction welding (FW) is cost-effective, efficient, occupational safer and also eco-friendly in the absence of pollution, smoke, fume, and IR radiation during welding than conventional welding technologies.
S. Senthil Murugan +2 more
doaj +1 more source

