Results 11 to 20 of about 5,871,490 (288)

Material Defects in Friction Stir Welding through Thermo-Mechanical Simulation: Dissimilar Materials with Tool Wear Consideration. [PDF]

open access: yesMaterials (Basel), 2022
Despite the remarkable capabilities of friction stir welding (FSW) in joining dissimilar materials, the numerical simulation of FSW is predominantly limited to the joining of similar materials.
Das D, Bag S, Pal S, Sharma A.
europepmc   +2 more sources

Joining of dissimilar materials by friction stir welding

open access: yesMATEC Web of Conferences, 2018
Welding is a process of joining materials into one piece. Welding is used extensively for pipe welding, aerospace, aviation, biomedical implants, fabrication of race cars, choppers, etc.
Boumerzoug Zakaria
doaj   +2 more sources

Study on Interfacial Bonding Properties of NiTi/CuSn10 Dissimilar Materials by Selective Laser Melting [PDF]

open access: yesMicromachines, 2022
The dissimilar materials bonding of NiTi alloy with shape memory effect (SME) and CuSn10 alloy with good ductility, electrical conductivity, and thermal conductivity can be used in aerospace, circuits, etc.
Changhui Song   +4 more
doaj   +2 more sources

Effect of materials positioning on dissimilar modified friction stir clinching between aluminum 5754-O and 2024-T3 sheets [PDF]

open access: yes, 2020
Dissimilar welding in lap joint configuration between AA5754-O and AA2024-T3 materials is successfully performed using novel technique of Modified Friction Stir Clinching (MFSC) process, wherein materials positioning is analyzed in this investigation ...
Mehta, Kush   +4 more
core   +4 more sources

Dissimilar friction stir welding of Al to non-Al metallic materials : An overview [PDF]

open access: yes, 2022
Publisher Copyright: © 2022 Elsevier B.V.The paper presents a comprehensive review on dissimilar friction stir welding (FSW) of Al to non-Al metallic materials, wherein the combination of Al–Mg, Al–Cu, Al-steel and Al–Ti are covered. The summary revealed
Mehta, Kush P.   +7 more
core   +4 more sources

Friction Spot Extrusion Welding on Dissimilar Materials AA2024-T3 to AA5754-O: Effect of Shoulder Plunge Depth [PDF]

open access: yes, 2021
In the present investigation, friction spot extrusion welding was investigated for dissimilar AA2024-T3 and AA5754-O materials, under the effect of three different shoulder plunge depths of 0.25, 0.35 and 0.45 mm, keeping other parameters constant.
Babaei, B.   +9 more
core   +3 more sources

The influence of position in overlap joints of Mg and Al alloys on microstructure and hardness of laser welds [PDF]

open access: yes, 2013
Structure and properties of laser beam welding zone of dissimilar materials, AZ31 magnesium alloy and A5754 Aluminum alloy, are investigated. The microstructure and quality of the Mg/Al weld were studied by metallography, microhardness and optical ...
BANNOUR, Sana   +11 more
core   +1 more source

Friction Stir Lap Welding of Inconel 625 and a High Strength Steel

open access: yesMetals, 2023
The joining of dissimilar hard metals such as high-strength steel and nickel-based alloy is required for shipbuilding and offshore applications to enhance the strength, fracture toughness, and corrosion resistance of the exposed parts.
Elisangela Pelizzari Bossle   +7 more
doaj   +1 more source

Novel Processing Algorithm to Improve Detectability of Disbonds in Adhesive Dissimilar Material Joints

open access: yesSensors, 2021
Adhesively bonded dissimilar materials have attracted high interest in the aerospace and automotive industries due to their ability to provide superior structural characteristics and reduce the weight for energy savings.
Damira Smagulova   +2 more
doaj   +1 more source

Interface shape identification of three-dimensional thermo-elastic composite structures consisting of dissimilar materials

open access: yesNihon Kikai Gakkai ronbunshu, 2015
Shape design of composite structures composed of dissimilar materials moves more into the field of vision for designers. In this paper we propose a shape identification method for the interface and/or outside shape design of composite structures ...
Masatoshi SHIMODA   +2 more
doaj   +1 more source

Home - About - Disclaimer - Privacy