Results 21 to 30 of about 5,871,490 (288)

Joining of Aluminum Alloy AA7075 and Titanium Alloy Ti-6Al-4V through a Friction Stir Welding-Based Process

open access: yesMetals, 2023
Combining dissimilar parts has become imperative for developing the structures based on lightweight materials, such as metal alloys, polymers or polymer matrix composites, and this has become one of the solutions to reverse the current trend of CO2 ...
Francisco Dias   +5 more
doaj   +1 more source

Analysis of laser welding on dissimilar materials with the influence of adding interlayer

open access: yesJournal of Materials Research and Technology, 2023
The laser welding of dissimilar materials poses several challenges in practical applications, such as molten pool instability, the formation of intermetallic compounds (IMCs), and cracking caused by differential thermal stresses.
Ali N. Saleh   +3 more
doaj   +1 more source

A Novel Approach to Friction Drilling Process: Experimental and Numerical Study on Friction Drill Joining of Dissimilar Materials AISI304/AL6061

open access: yesMetals, 2022
Joining dissimilar materials is always a challenging and interesting topic for researchers and industries. Friction drill joining, as a solid-state process, is a novel approach to connecting similar and dissimilar materials. Dissimilar metals, especially
Shayan Dehghan   +4 more
doaj   +1 more source

Feasibility and optimization of dissimilar laser welding components [PDF]

open access: yes, 2008
Demands placed on dissimilar metals joints have increased from various viewpoints, such as, environmental concerns, energy saving, high performance, cost saving and so on.
Hassan, Ezzeddin Mohamed
core   +2 more sources

Numerically Based Phase Transformation Maps for Dissimilar Aluminum Alloys Joined by Friction Stir-Welding

open access: yesMetals, 2018
Sheets of aluminum 2017A-T451 and 7075-T651 were friction stir-welded in a butt-weld configuration. An existing computational model of the welding process for temperature distribution and material flow was adapted to estimate the phase transformations ...
Carter Hamilton   +4 more
doaj   +1 more source

Analysis of Failure-Mode Dependent Joint Strength in Hole Clinching from the Aspects of Geometrical Interlocking Parameters

open access: yesMetals, 2018
The hole-clinching process is one of the mechanical methods for joining dissimilar materials, such as aluminum alloy with advanced high-strength steel, hot-pressed steel, and carbon fiber reinforced plastics, employing forming technology-based methods ...
Chan-Joo Lee   +4 more
doaj   +1 more source

Mechanical properties and microstructural characteristics of rotary friction welded dissimilar joints of rolled homogeneous armor steel and medium carbon steel

open access: yesJournal of the Mechanical Behavior of Materials, 2021
Distinct materials are used for the construction of battle tanks used in defense sectors. The hull and turret of the battle tanks are made up of rolled homogeneous armor steel (also known as armor steel).
Karthick K.   +2 more
doaj   +1 more source

Numerical estimation of temperature field in a laser welded butt joint made of dissimilar materials

open access: yesMATEC Web of Conferences, 2018
The paper concerns numerical analysis of thermal phenomena occurring in the butt welding of two different materials by a laser beam welding. The temperature distribution for the welded butt-joint is obtained on the basis of numerical simulations ...
Saternus Zbigniew   +4 more
doaj   +1 more source

Using Taguchi method to optimize welding pool of dissimilar laser welded components [PDF]

open access: yes, 2008
In the present work CO2 continuous laser welding process was successfully applied and optimized for joining a dissimilar AISI 316 stainless steel and AISI 1009 low carbon steel plates. Laser power, welding speed, and defocusing distance combinations were
Anawa, E., Olabi, Abdul-Ghani
core   +2 more sources

Estimation of singular stress field of an interface crack in orthotropic dissimilar material by using the solution for isotropic dissimilar material

open access: yesNihon Kikai Gakkai ronbunshu
For isotropic dissimilar materials, it is well known that the stress state can be expressed by two independent material composite parameters named Dundurs parameters αiso, βiso.
Kazuhiro ODA   +3 more
doaj   +1 more source

Home - About - Disclaimer - Privacy