Results 251 to 260 of about 454,587 (291)

Nonlinear Control of Induction Motors: Torque Tracking with Unknown Load Disturbance

1992 American Control Conference, 1992
Ortega and Espinosa (1993) presented a globally stable controller for torque regulation of a complete induction motor model with partial state feedback, i.e., no assumption of flux measurement. The result was established under the assumptions that both the desired and load torques are constant, that the former does not exceed certain bounds which ...
Romeo Ortega, Carlos Canudas, Seleme I. Seleme   +2 more
openaire   +1 more source

On electrodynamical compensation of a torque disturbing satellite orientation

2015 International Conference "Stability and Control Processes" in Memory of V.I. Zubov (SCP), 2015
A satellite with electrodynamic attitude control system is considered. The problem of compensation of an external disturbing torque is solved. The optimization of control process in vicinity of programmed motion is achieved on the basis of control system without involving additional measuring devices.
openaire   +1 more source

Intelligent Controllers in Path Tracking of a Manipulator with Bounded Disturbance Torque

2013
Sliding mode controller (SMC) is an effective motion control strategy for robotic manipulator systems, which can ensure globally asymptotic stability. However, SMC suffer from chattering problem and a-priori knowledge of upper bound of the uncertainty is required for its effectiveness.
Neha Kapoor, Jyoti Ohri
openaire   +1 more source

Torque disturbance rejection in high accuracy tracking systems

IEEE Transactions on Aerospace and Electronic Systems, 1990
The possibility of rejecting torque disturbances that degrade the pointing and tracking accuracy of electromechanical pedestals and general two-axis systems used for target acquisition and robotics is discussed. Torque rejection achieved through disturbance estimation and compensation results in a vast improvement in pointing accuracy. For the class of
J.A. Profeta, W.G. Vogt, M.H. Mickle
openaire   +1 more source

A Redundant Manipulator Joint Torque Estimation Method Based on Disturbance Observer

International Journal on Artificial Intelligence Tools, 2020
With the continuous development of the robot industry, both industrial robots and collaborative robots are developing towards light type and intelligence. The core issue is that how to improve the dynamic control performance of robots and reduce costs. The accurate torque feedback control can be achieved by introducing a joint torque sensor.
Xun Liu, Yaqiu Liu, Hanchen Zhao
openaire   +2 more sources

Manufacturing Errors Effects on Disturbing Torque of Aerostatic Bearings

Applied Mechanics and Materials, 2009
In order to improve the drifting accuracy of aerostatic bearings, the manufacturing errors effects on disturbing torque of aerostatic bearings is studied by using the finite element method. The finite element mathematic model of the major influence factors of disturbing torque is established.
Jing Shi Liu, Ya Zhou Sun, Li Hua Lu, Ying Chun Liang   +3 more
openaire   +1 more source

Rejection of nonlinear disturbance torque in servomechanism with repetitive control

IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02, 2003
In this paper, a repetitive control method is presented for the rejection of significant nonlinear disturbance torque in servomechanisms. The disturbance torque dealt with is assumed to be periodic in position, which is the main cause for the degradation of the system steady-state precision. A sufficient condition for stability is given.
null Dongchun Zhang, null Ming Zeng, null Baoku Su   +2 more
openaire   +1 more source

Reducing Disturbances Caused by Reductions in Regenerative Brake Torque

SAE Technical Paper Series, 2011
<div class="section abstract"><div class="htmlview paragraph">This paper presents a method to reduce the number of occurrences of vehicle deceleration disturbances due to the reduction of regenerative braking in the presence of wheel slip. Usually, regenerative braking is disabled when wheel slip is detected in order to allow the ABS system
Eric Krueger, Kevin Kidston, Adam Busack
openaire   +1 more source

Real-time path tracking with torque limits by using a disturbance observer

Proceedings of the 1994 IEEE International Conference on Robotics and Automation, 2002
When the minimum-time trajectory of a manipulator along a geometrically prescribed path is planned, considering the manipulator's dynamics and actuators' torque limits, at least one of the joints is at the torque limit. The execution of such a trajectory by a conventional feedback scheme results in torque saturation.
Hirohiko Arai, Kazuo Tanie
openaire   +1 more source

Switching Position-Torque Control for Series Elastic Actuators with Disturbance Observer

IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, 2019
This paper proposes a novel switch control for the series elastic actuator (SEA). This switch control provides more robust position control along with better impulse dissipation performance. SEA is an actuator technology commonly used in robotic applications that require safe and precise interaction control.
Minjae Jo, Hyunwook Lee, Sehoon Oh
openaire   +2 more sources