Results 41 to 50 of about 331,821 (301)

Investigating the Effect of Inclination Angle and the Influence of Scan Parameters on the Appearance and Thermal and Mechanical Properties of Filigree Tension Rods of LPBF‐Manufactured NiTi Shape‐Memory Alloys

Advanced Engineering Materials, EarlyView.
This article investigates the dependence of the properties on the manufacturing orientation in the form of the inclination angle to the build plate of LPBF‐fabricated NiTi rods with a diameter of 150–220 µm. Metallographic, chemical, thermal, and mechanical characterization show behavior under identical manufacturing conditions that ranges from ...
Sandra Herzig, Michael Werner, Christian Rotsch   +2 more
wiley   +1 more source

Entropy‐Driven Design of Low‐Melting‐Point Alloys via Compositionally Complex Strategy

Advanced Engineering Materials, EarlyView.
Conventional low‐melting‐point alloys (LMPAs) are limited by a narrow compositional space and inherent property trade‐offs. This review presents an entropy‐driven design strategy that overcomes these limitations, ushering in a new class of low‐melting‐point compositionally complex alloys (LMCCAs).
Yinghui Shang, Jianxiang Zhao, Zhaoqi Chen, Hao Gong, Yinsen Yan, Junlei Tao, Yong Yang   +6 more
wiley   +1 more source

Effect of osmotic dehydration on kiwifruit: Results of a multianalytical approach to structural study [PDF]

Journal on Processing and Energy in Agriculture, 2011
This paper presents the results of the comparison of different analytical techniques (Differential Scanning Calorimetry - DSC, Low Field Nuclear Magnetic Resonance - LF-NMR, Light Microscopy - LM and Transmission Electron Microscopy - TEM) in order to ...
Rosa Dalla Marco, Tylewicz Urszula, Panarese Valentina, Laghi Luca, Pisi Annamaria, Santagapita Patricio, Rocculi Pietro   +6 more
doaj  

Computer-Aided Lipid Design: phase equilibrium modeling for product design [PDF]

, 2010
The aim of this work is use phase equilibrium modeling as an auxiliary tool for product design, especially for those whose desired final properties are directly related to solid fat content (SFC) and melting behaviour.
Moises T. dos Santos, Teles dos Santos, Moises, Carrillo Le Roux, Galo, Vincent Gerbaud, Galo A.C. Le Roux, Gerbaud, Vincent   +5 more
core   +1 more source

Microstructural Evolution and In Situ Formation of TiB and TiC in Ti─5Al─2.5Sn Alloy Processed by Powder Metallurgy

Advanced Engineering Materials, EarlyView.
Accelerated in situ formation of TiB and TiC in Ti–5Al–2.5Sn–B4C is driven by transient liquid phase formation, which enhances particle reactions and microstructural evolution. This process increases hardness and establishes a coupled relationship between sintering temperature and reinforcement content, strongly influencing porosity in the resulting ...
Fernando. Y. Kojima, Juliano. Soyama
wiley   +1 more source

Digital Light Processing of Thermoplastic Poly(methyl methacrylate) Photoresin Combined With Solvent Vapor Smoothing

Advanced Engineering Materials, EarlyView.
A thermoplastic PMMA‐based photoresin enables high‐resolution DLP printing followed by solvent‐vapor smoothing. The treatment reduces staircase‐induced surface roughness from 2.33 µm to 129 nm and increases visible‐light transmittance from approximately 30% to 80%, providing a route toward transparent PMMA components for rapid prototyping and non ...
Rozhin Heydarpour, Yuanyuan Li, Sebastian Kluck, Afnan Quazzie‐Hauser, Bastian E. Rapp, Frederik Kotz‐Helmer   +5 more
wiley   +1 more source

Effect of Calendering and Surface Treatment on the Thermochromic Response of Cholesteric Liquid Crystals on PET Nonwovens

Advanced Engineering Materials, EarlyView.
This study explores the influences of calendering and surface treatment during direct ink writing (DIW) of thermochromic cholesteric liquid crystal (CLC) on PET nonwovens. For the PVA‐coated nonwovens, calendering reduces pore size leading to reduced ink absorption and enhanced spreading. The NeverWet‐coated nonwovens improve thermochromic responses by
Sreenivasan Sreenivasan Narayanan, Lineth Pérez Monsalve, Christina Tang, Hong Zhao   +3 more
wiley   +1 more source

Biodegradable and Biocompatible Functional Polymers for Biomedical Applications

Advanced Functional Materials, EarlyView.
Biodegradable and biocompatible functional polymers integrate electrical, mechanical, and stimuli‐responsive functionalities while enabling programmed degradation under physiological conditions. This review introduces recent advances in conductive, shape‐memory, self‐healing, photocurable, and adhesive polymer systems, emphasizing material design ...
Won Bae Han, Shuvra Mondal, Sungkeun Han, Chan‐Hwi Eom, Venkata Ramesh Naganaboina, Suk‐Won Hwang   +5 more
wiley   +1 more source

Transformation Temperatures, Shape Memory and Magnetic Properties of Hafnium Modified Ti-Ta Based High Temperature Shape Memory Alloys

High Temperature Materials and Processes, 2017
In this study the modification effect of Hf content on the shape memory properties and magnetic permeability of a 75.5-77Ti-20Ta-3-4.5Hf alloy system has been systematically studied by DSC, three-point bend test, vector network analyzer and XRD.
Khan W.Q., Wang Q., Jin X.
doaj   +1 more source

Quantitative analysis of DSC-CBF, DSC-TTP and ASL-relCBF.

, 2014
20(ROIs) were placed on the FLAIR image and copied onto coregistered DSC-CBF, DSC-TTP and ASL images. For relative values, the ratio of each ipsilateral ROI to the arithmetic mean of all contralateral ROIs was calculated.
Olivier Zaro Weber (585005), Katharina L. Stengl (320696), Miriam Bauer (320695), Stefan Hetzer (585007), Federico C. von Samson-Himmelstjerna (320694), Gajanan S. Revankar (585006), Matthias A. Mutke (320697), Jan Sobesky (320700), Matthias Günther (585008), Vince I. Madai (320692), Steve Z. Martin (541233)   +10 more
core   +1 more source