Results 21 to 30 of about 574,724 (266)
Materials Research Letters, 2018 A full picture of tensile deformation mechanism evolution in the FCC-to-HCP transformation-induced plasticity high entropy alloy (TRIP-HEA) was revealed by real-time in situ neutron diffraction. Three transition points, i.e. the triggering of TRIP in the
S. Fu +5 more
doaj +1 more source
Sensors, 2021 A passive homodyne phase demodulation technique based on a linear-fitting trigonometric-identity-transformation differential cross-multiplication (LF-TIT-DCM) algorithm is proposed.
Wanjin Zhang +5 more
doaj +1 more source
Ultrafine-grained dual phase Al0.45CoCrFeNi high-entropy alloys
Materials & Design, 2019 A duplex microstructure consisting of body-centered-cubic (BCC/B2) and face-centered-cubic (FCC) phases was observed after homogenization and recrystallization treatments in Al0.45CoCrFeNi high-entropy alloys (HEAs).
Jinxiong Hou +5 more
doaj +1 more source
Metals, 2021 Advanced high strength dual-phase steels are one of the most widely sought-after structural materials for automotive applications. These high strength steels, however, are prone to fracture under bending-dominated manufacturing processes.
Yu Liu +3 more
doaj +1 more source
IEEE Photonics Journal, 2016 A new microwave photonic phase controlling structure that can realize a continuously tunable 0 $^{\circ}$ to 360 $^{\circ}$ phase shift using only one DC voltage control is presented.
T. Niu +4 more
doaj +1 more source
Pseudocoloring for a dual‐phase grating method [PDF]
Optical Engineering, 1996 A simple method for adjusting pseudocolor distributions of photographic images is described and demonstrated experimentally. This method is based on the technique for photographic phase image pseudocolor modulated by a grating. A reflecting ray path is introduced into a 4f system to produce diffraction of the dual-phase grating so that the pseudocolor ...
Cai, HT, Fung, PCW
openaire +3 more sources
Microstructural evolution and strengthening mechanisms in CrxMnFeNi high-entropy alloy
Journal of Materials Research and Technology, 2021 In the present work, we reported the microstructure and mechanical properties of CrxMnFeNi high-entropy alloy (HEA). The microstructures of the HEAs were characterized by scanning electron microscopy (SEM) with electron back-scattered diffraction (EBSD ...
Youyou Zhang +5 more
doaj +1 more source
Phase Noise Influence in a Dual-Frequency Laser Phase-Shift Range Finder
IEEE Photonics Journal, 2018 The influence of phase noise in a dual-frequency laser phase-shift range finder is theoretically and experimentally investigated. The proposed range finder is based on the use of a coherent dual-frequency laser and direct detection of the backscattered ...
Hongzhi Yang +4 more
doaj +1 more source
FIBRE LASER WELDING OF DUAL PHASE STEELS
Acta Metallurgica Slovaca, 2015 The fibre laser welding of two different dual phase steels HCT980X and HCT600X was evaluated. The sheets with thickness of 1.2 mm were welded using the solid-state fibre laser IPG type YLR 4500 with maximum output 4.5 kW and wave length 1060 nm at ...
Pavol Švec +3 more
doaj +1 more source
On the Effect of Heat-Treatments in a PBF-LB/M Processed FeCrMnNi Medium-Entropy Alloy
MetalsFeCrMnNi-based alloys, derived from the well-known Cantor high-entropy alloy, have attracted increasing attention due to their excellent strength–ductility balance. Additively manufactured FeCrMnNi variants are characterized by superior hardness compared
David Maximilian Diebel +3 more
doaj +1 more source