Results 111 to 120 of about 237,627 (302)

Numerical thermo-elasto-plastic analysis of residual stresses on different scales during cooling of hot forming parts [PDF]

, 2019
In current research, more and more attention is paid to the understanding of residual stress states as well as the application of targeted residual stresses to extend e.g. life time or stiffness of a part.
Brands, D., Scheunemann, L., Schröder, J., Uebing, S.   +3 more
core  

Consumed by Abdominal Distention

Arthritis Care &Research, EarlyView.
Abimbola Fadairo‐Azinge, James Grenert, Brian Haas, Mary Margaretten   +3 more
wiley   +1 more source

Four‐Point Bending Tests at High Temperatures on Commercial MgO‐C Refractory Bricks with and Without Recyclate Considering Different Carbon Contents

Advanced Engineering Materials, EarlyView.
Four‐point bending tests are conducted in an argon atmosphere on commercial MgO‐C brick grades with and without MgO‐C recyclate from room temperature up to 1300 °C. No detrimental effect of the MgO‐C recyclates on bending strength is found. Instead, a decisive influence of the total carbon content is observed, with lower total carbon contents ...
Alexander Schramm, Lukas Knöchel, Thomas Schemmel, Christos G. Aneziris, Anja Weidner, Horst Biermann   +5 more
wiley   +1 more source

Two- and Three-Dimensional Modeling and Simulations of Grain Growth Behavior in Dual-Phase Steel Using Monte Carlo and Machine Learning. [PDF]

Materials (Basel), 2023
Sun F, Kita A, Ogawa T, Chen TT, Adachi Y.   +4 more
europepmc   +1 more source

Micromechanical modeling of dual phase steels

International Journal of Mechanical Sciences, 2003
zbMATH Open Web Interface contents unavailable due to conflicting licenses.
Al-Abbasi, F. M., Nemes, J. A.
openaire   +2 more sources

Thermophysical Properties of the Desulphurization Slags With Various CaS and CaO/Al2O3 Ratio

Advanced Engineering Materials, EarlyView.
This article investigates how CaS content and the CaO/Al2O3 ratio influence the thermophysical properties of desulphurization slags. Using experimental measurements and thermodynamic simulations, this study reveals complex effects on viscosity, surface tension, and density, providing new insight into slag structure and phase behavior under ...
Eldar Salpagarov, Matheus Roberto Bellé, Anton Yehorov, Julia Richter, Olena Volkova   +4 more
wiley   +1 more source

Study on laser welding of dual phase steel

Metalurgija, 2021
In this paper, Neodymium-doped Yttrium Aluminum Garnet crystal laser welding machine is used to study the laser welding process of dual phase steel. The electric current, pulse width and frequency are selected as variables for welding, and the maximum ...
F. B. Chang, Y. Gao, L. Gao, L. Y. Huang
doaj  

Physical Simulation and Numerical Simulation of Flash Butt Welding for Innovative Dual Phase Steel DP590: A Comparative Study. [PDF]

Materials (Basel), 2023
Song J, Zhu L, Wang J, Lu Y, Ma C, Han J, Jiang Z.   +6 more
europepmc   +1 more source

Al–Cu Composite Casting of Laser‐Deoxidized Copper: Bonding, Interfacial Chemistry, and Thermal Conductivity

Advanced Engineering Materials, EarlyView.
This study investigates laser‐based oxide removal of Cu inserts in oxygen‐free conditions and examines long‐term oxidation kinetics and surface chemistry under different atmospheres via X‐ray photoelectron spectroscopy. Al–Cu compound casting with differently oxidized surfaces is performed, and intermetallic phase formation, morphology, and thermal ...
Timon Steinhoff, Finn‐Lennard Janthur, Sascha Zimmermann, Sarah Seffer, Jörg Hermsdorf, René Gustus, Ludger Overmeyer, Wolfgang Maus‐Friedrichs, Hans Jürgen Maier, Christian Klose   +9 more
wiley   +1 more source

Effect of Cold Rolling on Microstructural and Mechanical Properties of a Dual-Phase Steel for Automotive Field. [PDF]

Materials (Basel), 2022
Bassini E, Marchese G, Sivo A, Martelli PA, Gullino A, Ugues D.   +5 more
europepmc   +1 more source