Results 1 to 10 of about 21,798 (290)
Microstructure of as cast reinforced ductile iron [PDF]
International Journal of Cast Metals Research, 2011 Local hardening of parts made of ductile iron may be achieved by having carbides appearing in appropriate locations. The present work focuses on the study of the as cast microstructure of parts reinforced by Cr containing steel inserts. The presence of such inserts in the mold cavity results in localised chemical changes during the casting process ...
Martinez Celis, Mayerling +5 more
exaly +4 more sources
CThis paper presents a comparative analysis of ausferritic ductile cast iron matrix obtained through heat treatment and in its raw state. Ausferrite without heat treatment was achieved by modifying the chemical composition, while nodular graphite was ...
Leszek Klimek +4 more
doaj +3 more sources
Ductile iron with nodular and compact graphite as a rational alternative to malleable cast iron [PDF]
E3S Web of Conferences, 2023 There is a need for cast irons with a combined combination of properties in modern conditions. Such properties can be provided by ductile cast iron with nodular and vermicular graphite, which is essentially a hybrid cast iron in terms of microstructure ...
Boldyrev Denis +3 more
doaj +1 more source
Effect of Nitriding Process on Wear Behavior of Dual Phase (Ferrite+Martensite) Ductile Cast Iron
Gazi Üniversitesi Fen Bilimleri Dergisi, 2022 In this study, it was aimed to improve the surface hardness by applying gas nitriding treatment to dual-phase ductile cast iron and to produce ductile cast irons with a good strength-ductility combination.
Elif ERDOĞAN +5 more
doaj +1 more source
Pitting strength estimate for cast iron and copper alloy materials [PDF]
FME Transactions, 2021 An attempt is made to predict the pitting strength of cast iron and copper alloy materials from their compressive yield or compressive proof strength for a reliability of 99% at 107 load cycles.
Osakue Edward E. +2 more
doaj +1 more source
Production of Ductile Iron Using Inside-Mold Treatment Technique
Iraqi Journal of Industrial Research, 2022 Ductile Cast Iron is a widely used cast iron. Ductile iron applications are used in various sectors of modern mechanical industries. Ductile iron has wide uses in the field of car industry, military industries, agricultural equipment, construction and ...
Harith Hammody Abdullah +2 more
doaj +1 more source
Surface Laser Treatment of Cast Irons: A Review
Metals, 2022 Heat treatments are frequently used to modify the microstructure and mechanical properties of materials according to the requirements of their applications.
Néstor Catalán +3 more
doaj +1 more source
A Study on Wear and Erosion-Corrosion Resistance of Two Typs of Cast Irons. [PDF]
Engineering and Technology Journal, 2008 The wear and erosion-corrosion resistance of gray and ductile cast ironswere studied for their important in most applications. The wear tests were carriedout using a pin-on-disc machine by applying different loads (10,20 and 30 N).
Sami A.Ajeel, Safaa Mohammed Hasoni
doaj +1 more source
Ductile and Gray Cast Irons Deterioration with Time in Various NaCl Salt Concentrations [PDF]
Engineering and Technology Journal, 2008 Gray cast iron is used in wide engineering applications especially pipesand these pipes are exposed to failure in most cases so that ductile cast iron is usedinstead of it later.This project deals with the study of microstructure characteristics ...
Sami A. Ajeel, Safaa Mohommed Hasoni
doaj +1 more source
Filler materials used to weld ductile cast iron – A review [PDF]
MATEC Web of Conferences, 2022 Austempered ductile iron (ADI) is a new engineering material type which continue receiving increased attention in research and industry. Extensive research conducted so far has demonstrated that ADI has excellent property combination such as high ...
Mphela Caroline +3 more
doaj +1 more source