Results 21 to 30 of about 3,341,475 (275)

The Effect of Stress Level on the Resilient Modulus of Non-Engineered Mudrock Backfill Materials

open access: yesCivilEng, 2022
In the UK, High Speed Rail 2, (London to the ‘North’) is surrounded by a number of questions regarding construction technologies which can minimise the impact of the route.
Shaymaa Kennedy   +2 more
doaj   +1 more source

Study on Cracking Resistance of Basalt Fiber-Reinforced Microbond Asphalt Macadam

open access: yesAdvances in Civil Engineering, 2021
The aim of the present study was to explore the effect of basalt fibers on the cracking resistance of microbond asphalt macadam and reduce the occurrence of cracks in asphalt pavements with semirigid base. To this end, compressive resilient modulus tests,
Xin Yan   +3 more
doaj   +1 more source

Resilient modulus prediction of RAP using the Contact Dynamics Method

open access: yesTransportation Geotechnics, 2020
Abstract The Optimal Recycling of Reclaimed Asphalts in low-traffic Pavements (ORRAP) project concerns a cold recycling of 100% Reclaimed Asphalt Pavement (RAP) without binder addition, in base and subbase layers of low-traffic pavements. The mastic coating of aggregates induces a viscoelastic behaviour and changes the resilient modulus with ...
Gaillard, Laura   +3 more
openaire   +2 more sources

Resilient Modulus Characterization of Compacted Cohesive Subgrade Soil

open access: yesApplied Sciences, 2017
Soil investigations concerning cyclic loading focus on the evaluation, in particular, of design parameters, such as elastic modulus, Poisson’s ratio, or resilient modulus.
Wojciech Sas   +4 more
doaj   +1 more source

Dynamic Parameters and Hysteresis Loop Characteristics of Frozen Silt Clay under Different Cyclic Stress Paths

open access: yesAdvances in Materials Science and Engineering, 2021
In cold regions, the long-term stability of engineering facilities is unavoidably influenced by the negative temperature, freeze-thaw process, dry-wet process, and dynamic loading conditions induced by earthquakes and traffic loads.
Furong Liu   +4 more
doaj   +1 more source

Influence of Humidity State on Dynamic Resilient Modulus of Subgrade Soils: Considering Repeated Wetting‐Drying Cycles [PDF]

open access: yesAdvances in Materials Science and Engineering, 2021
The service performance of subgrade depends on the dynamic resilient modulus (MR) of subgrade soils. Meanwhile, due to complicated conditions such as rainfall infiltration, high temperature evaporation, and groundwater level fluctuations, it can be safely said that the humidity state and repeated wetting‐drying (WD) cycles affect the MR of subgrade ...
Gongfeng Xin   +4 more
openaire   +2 more sources

arminmth/Dynamic-Modulus-Master-Curve-for-Hot-Mix-Asphalt-HMA-: Dynamic-Modulus-Master-Curve-for-Hot-Mix-Asphalt

open access: yes, 2020
The Objective of this code is to solve a "modified version of the Mechanistic-Empirical Design Guide master curve equation". This program reads directly the raw output data related to a series of tests performed for a single Hot Mix Asphalt Material from
Armin Motahari
core   +1 more source

New Models for the Properties of Warm Mix Asphalt with Sasobit

open access: yesCivilEng, 2022
Warm Mix Asphalt (WMA) is a set of technologies that uses additives to reduce binder viscosity and increase mixture workability, which provides a complete coating of aggregates at lower temperatures around 100 °C to 130 °C.
Morteza Rezaeizadeh Herozi   +4 more
doaj   +1 more source

Evaluation of Stiffness to Predict Rutting Resistance of Hot-Mix Asphalt: a Canadian Case Study

open access: yesThe Baltic Journal of Road and Bridge Engineering, 2014
This paper investigates the relationship between the stiffness and rutting resistance of hot-mix asphalt. Ten different types of hot-mix asphalt were examined.
Md. Safiuddin   +2 more
doaj   +1 more source

Empirical Method for Evaluating Resilient Modulus of Saturated Silty Clay under Cyclic Loading

open access: yesAdvances in Civil Engineering, 2020
Resilient modulus of soil is crucial for the design of a structure on a foundation subjected to a cyclic loading (e.g., traffic load or machine vibration load).
Zhen Zhang   +5 more
doaj   +1 more source

Home - About - Disclaimer - Privacy