Results 81 to 90 of about 3,564,979 (275)
Transportation EngineeringThis study aims to investigate the dynamic creep, indirect tensile, and moisture damage performance of Sasobit-modified asphalt mixtures. The asphalt mixture specimens were prepared using the optimum asphalt content determined by the Superpave mixture ...
Khalid A. Ghuzlan +2 more
doaj +1 more source
Seamless Mechanical Programming Through Hybrid Epoxy–Acrylate Printing for Soft–Rigid Robots
Advanced Materials, EarlyView.Hybrid epoxy‐acrylate printing enables seamless fabrication of soft–rigid robotic systems with covalently integrated interfaces and functionally graded mechanics. Grayscale exposure expands the accessible material space, enabling spatially programmed actuation through patterned stiffness while revealing the mechanics and durability of continuously ...
David C. Bershadsky +3 more
wiley +1 more source
Undrained deformation characteristic of saturated soft clay under traffic loading
Shuiwen dizhi gongcheng dizhiPrevious studies on the undrained deformation behavior of saturated soft clay under traffic loading usually ignored the effect of cyclic confining pressure.
Lei SUN, Yuke WANG
doaj +1 more source
Vitamin C‐Induced Photo‐Redox Threshold Enables High‐Fidelity Volumetric Printing of Collagen
Advanced Materials, EarlyView.Tomographic volumetric printing (TVP) of native proteins is limited by uncontrolled background crosslinking. Here, vitamin C is introduced as a biocompatible redox regulator to establish a tunable nonlinear polymerization threshold response for TVP.
Bin Wang +5 more
wiley +1 more source
RecyclingThe durability characteristics of inorganic mixtures incorporating recycled aggregates from rural residential construction and demolition waste with high red brick content remain inadequately elucidated.
Pengfei Li +5 more
doaj +1 more source
Conformal Coating and Transfer of 2D Nanomaterials via Dynamic Interface Engineering
Advanced Materials Interfaces, EarlyView.This review discusses conformal coating and transfer of two‐dimensional (2D) nanomaterials with a focus on dynamic interface engineering. By actively regulating nanosheet transport and interfacial contact during film formation, recent dynamic coating strategies overcome the limitations of conventional passive approaches and enable geometry‐adaptive ...
Seungyeon Kim +4 more
wiley +1 more source
Advances in Civil Engineering, 2019 The mechanical characteristics of siltstone under high static load and frequent dynamic disturbance were investigated by the improved split Hopkinson pressure bar (SHPB), which is used to simulate the failure phenomenon of the extracted ore drift owing ...
Lu-ping Cheng +8 more
doaj +1 more source
Influence of Gradation on Resilient Modulus of High Plasticity Soil-Gravel Mixture
Advances in Civil Engineering, 2020 Because of low resilient modulus, high plasticity soil is often not allowed to fill road subgrades and is discarded as construction and demolition waste (CDW).
Chuang Liu +4 more
doaj +1 more source
Validation of the New Mix Design Process for Cold In-Place Rehabilitation Using Foamed Asphalt, 2007 [PDF]
, 2007 Asphalt pavement recycling has grown dramatically over the last few years as a viable technology to rehabilitate existing asphalt pavements. Iowa's current Cold In-place Recycling (CIR) practice utilizes a generic recipe specification to define the ...
core
Advanced Materials Interfaces, EarlyView.This review outlines critical engineering design rules for building artificial protective coatings on next‐generation lithium metal and silicon battery anodes. It highlights how balancing structural flexibility with strict electronic and ionic transport limits prevents early battery failure.
Surin Gupte, Vilas G. Pol
wiley +1 more source