Results 21 to 30 of about 5,634 (233)

Assessment of cyclic deformation and critical stress amplitude of jointed rocks via cyclic triaxial testing

open access: yesJournal of Rock Mechanics and Geotechnical Engineering, 2023
Jointed rock specimens with a natural replicated joint surface oriented at a mean dip angle of 60° were prepared, and a series of cyclic triaxial tests was performed at different confining pressures and cyclic deviatoric stress amplitudes.
Waranga Habaraduwa Peellage   +2 more
doaj   +1 more source

Impact of triaxial stress state at various pavement depths on the dynamic modulus of asphalt mixture

open access: yesCase Studies in Construction Materials
The mechanical characteristics of asphalt mixture are closely related with its stress state, temperature, and loading rate, therefore, the loading condition of the asphalt mixture's dynamic modulus test should be consistent with the actual temperature ...
Jun Zhang, Ye Wang, Xudong Wang, Hao Chu
doaj   +1 more source

Strength and Failure Characteristics of Natural and Water-Saturated Coal Specimens under Static and Dynamic Loads

open access: yesShock and Vibration, 2018
Rock bursts occur frequently in coal mines, and the mechanical properties of saturated coal specimens under coupled static-dynamic loading need to be studied in detail.
Wen Wang   +4 more
doaj   +1 more source

Large dynamic triaxial test of tire scrap reinforced soil

open access: yesShuiwen dizhi gongcheng dizhi
With the continuous increase in train speed standards, the vibration amplitude between wheels and tracks intensifies, resulting in greater loads transmitted to the subgrade.
Lihua LI   +5 more
doaj   +1 more source

PRACTICAL INVESTIGATION OF GEOGRID-REINFORCED GRANULAR SOIL AT CYCLIC LOAD [PDF]

open access: yesProceedings on Engineering Sciences
To examine the impact of confining pressure on the dynamic properties of geogrid-reinforced gravel soil under a similar dynamic stress ratio and dynamic stress amplitude, a dynamic triaxial test was conducted using the dynamic triaxial test apparatus ...
Hassan Ali Ahmed   +2 more
doaj   +1 more source

Optimal sensor placement in hydropower house based on improved triaxial effective independence method

open access: yesWater Science and Engineering, 2012
The capacity and size of hydro-generator units are increasing with the rapid development of hydroelectric enterprises, and the vibration of the powerhouse structure has increasingly become a major problem.
Ji-jian Lian, Long-jun He, Hai-jun Wang
doaj   +1 more source

Dynamic Properties of Granulated Rubber Using Different Laboratory Tests

open access: yesBuildings, 2021
Due to the socio-environmental hazards arising from the stockpiling of disposed scrap tires, the necessity to utilize such material in civil construction and other applications is deemed mandatory.
Ahmed Moussa   +2 more
doaj   +1 more source

SANDY SOILS DYNAMIC STRENGTH PARAMETERS ACCORDING TO TRIAXIAL TESTS

open access: yesEngineering Geology World, 2019
Correct determination of strength properties is always relevant for the prediction of the mechanical behavior of soils and their massifs. Under static loading conditions, the issue is prominent in domestic and foreign literature, but the determination of strength properties under dynamic loading causes theoretical and methodical issues.
E. A. Sentsova   +2 more
openaire   +1 more source

Karl Popper and the Mechanisms of Hydrogen Embrittlement

open access: yesAdvanced Engineering Materials, EarlyView.
Representation of the beginning of loss of ductility rather than embrittlement. Small concentrations of hydrogen in a diffusible form within iron are well‐established to harm the mechanical integrity of steels. There are theories that attempt to explain the pernicious role of hydrogen.
H. K. D. H. Bhadeshia
wiley   +1 more source

Extrusion‐Based Additive Manufacturing of Advanced Ceramics: Strengthening Mechanisms and Process Optimization Review

open access: yesAdvanced Engineering Materials, EarlyView.
This review comprehensively evaluates extrusion‐based additive manufacturing for advanced ceramics, detailing feedstock options and key process parameters. By critically addressing defect mechanisms like porosity and cracking, the work highlights optimization strategies through machine learning and advanced postprocessing.
Meisam Bakhtiari   +4 more
wiley   +1 more source

Home - About - Disclaimer - Privacy