Bath Vibration During Open Eye Formation in a Physical Model of a Steelmaking Ladle
Using a physical model, this study shows that vibration measurements reliably predict open eye size in steelmaking ladles, offering a practical alternative to visual monitoring. Vessel vibrations stabilize faster than the open eye, except at high frequencies near the bottom.
Mika Pylvänäinen +6 more
wiley +1 more source
Bearing capacity and settlement behavior of square footing on coir geocell-reinforced sand under concentric and eccentric loading. [PDF]
Mani G, Subramanian S, Jagadesh P.
europepmc +1 more source
An improved air-gap flux control method of a bearingless induction motor based on the optimized mutual inductance. [PDF]
Lu C, Ding Q, Liu Z, Zhang Y.
europepmc +1 more source
Abstract Reinforced concrete (RC) beams can be subjected to torsion, and failure due to torsion is brittle and poses a significant risk to occupants. Moreover, strengthening of existing RC beams in torsion may be required due to the upgrade of the structures or as part of structural rehabilitation.
Ahmed Hamoda +4 more
wiley +1 more source
Anterior chamber inflammation grading with automatized image processing software. [PDF]
Aydoğdu Hİ, Yalçindağ FN.
europepmc +1 more source
Impact of half‐joint failures on RC girder bridges: A robustness quantification study
Abstract The robustness of bridge structures is critical to ensuring safety and service continuity, particularly in aging infrastructure exposed to degradation and unexpected loads. Reinforced concrete (RC) half‐joint bridges—widely built in Italy between the 1950s and 1970s—exhibit specific vulnerabilities due to inspection challenges, durability ...
Paolo Martinelli, Matteo Colombo
wiley +1 more source
Stability analysis of hydrodynamic journal bearings with variable axial geometrical configuration using titanium dioxide nanoparticles as lubricant additives. [PDF]
Awad H, Saber E, Abdou KM, Dajani S.
europepmc +1 more source
Innovative development and structural behavior of hollow columns using inflatable molds
Abstract This study introduces a novel approach for constructing hollow columns using precast (PC) methods enhanced by inflatable air tubes as internal molds. The proposed method addresses practical challenges in conventional hollow column construction, such as limited constructability, high production cost, and interference between internal molds and ...
Soo Hyung Kim +3 more
wiley +1 more source
An image-computable spatio-chromatic receptive field model of the midget retinal ganglion cell mosaic across the retina. [PDF]
Cottaris NP, Wandell BA, Brainard DH.
europepmc +1 more source
Nonlinear analysis of flat post‐tensioned concrete slab–edge column connections
Abstract This study presents nonlinear finite element analyses to investigate the punching shear behavior of unbonded post‐tensioned concrete flat slabs at slab‐edge column connections. A parametric analysis was conducted to evaluate the influence of four critical parameters on the punching shear resistance: the distribution of prestressing tendons ...
Igor Gonçalves +4 more
wiley +1 more source

