Results 91 to 100 of about 17,706 (234)

Interconnected Porous Hydrogels with Tunable Anisotropy Through Aqueous Emulsion Bioprinting

Advanced Functional Materials, EarlyView.
A 3D bioprintable microporous bioink is developed using an aqueous two‐phase system (ATPS) composed of extracellular matrix (ECM) mimetic biopolymers. The ATPS bioink enables the fabrication of interconnected porous architectures with up to 70% porosity, supporting long‐term cell viability and 3D cell alignment, enabling a simultaneous generation of ...
Hugo Edgar‐Vilar, Francisca P. Correia, Inês M. Freitas, Vítor M. Gaspar, João F. Mano   +4 more
wiley   +1 more source

Lateral Deformation Mechanisms of Piles in Coastal Regions Under Seawall Surcharge Loading and Mitigation Using Deep Cement Mixing (DCM) Piles

Buildings
In coastal regions with thick, soft soil deposits, bridge pile foundations are susceptible to lateral displacements induced by the construction of adjacent seawalls. This study employs a three-dimensional nonlinear finite element framework to investigate
Fei Huang, Zhiwei Chen, Huiyuan Deng, Wenbo Zhu   +3 more
doaj   +1 more source

Selection Strategies for Flexible Pressure Sensor Electrode Materials Toward Ultrafast Response

Advanced Functional Materials, EarlyView.
This study reveals, for the first time, how the electrode–organic interface governs the temporal performance of flexible pressure sensors. By pairing high‐conductivity CVD PEDOT with commonly used metal electrodes, the authors demonstrate that interfacial energy alignment dictates microsecond‐scale response, providing a straightforward design strategy ...
Jinwook Baek, Yuxuan Zhang, Hyeondong Yang, Minyoung Kim, Pavlos P. Vlachos, Jeongok Choe, Bo‐Gyu Bok, Kejie Zhao, Han‐Wook Song, Min‐Seok Kim, Martin Byung‐Guk Jun, Sunghwan Lee   +11 more
wiley   +1 more source

Adaptive 4D‐Printed Vascular Stents With Low‐Temperature‐Activated and Intelligent Deployment

Advanced Functional Materials, EarlyView.
Microarchitected coronary artery stents were fabricated using a polycaprolactone (PCL)‐based shape memory polymer (SMP) composite via projection micro‐stereolithography (PµSL) 4D printing. By incorporating diethyl phthalate (DEP) as a plasticizer, the thermal transition temperature (Ttran) was modulated to about 37°C, enabling rapid and autonomous ...
Yannan Li, Yifan Pan, Chikahiro Imashiro, Chaolun Xu, Jianxian He, Jingao Xu, Kewei Song, Ze Zhang, Chen Gao, Junbo Jiang, Runhuai Yang, Kayo Hirose, Shinjiro Umezu   +12 more
wiley   +1 more source

Toughening β‐Ga2O3 via Mechanically Seeded Dislocations

Advanced Functional Materials, EarlyView.
β‐Ga2O3 is promising for next‐generation semiconductors but its brittleness limits flexible and high‐precision applications. Here, mechanically seeded dislocations introduced by surface deformation improved damage tolerance in (001) β‐Ga2O3. Nanoindentation and characterization show dislocations suppress cleavage cracks by enabling stable plastic ...
Zanlin Cheng, Jiawen Zhang, Peng Gao, Guosong Zeng, Xufei Fang, Wenjun Lu   +5 more
wiley   +1 more source

Spatially Tailorable Liquid Crystalline Elastomer Alignment During Digital Light Process 3D Printing

Advanced Functional Materials, EarlyView.
Here, we report the fabrication of 3D printable liquid crystalline elastomer (LCE) structures with spatially tailorable alignment domains within the same layer. This work addresses the long‐standing challenge of preparing complex 3D LCE architectures with patterned functional domains to achieve nonlinear deformations. Fabrication of multi‐domains in 3D
Adam Bischoff, Saman Jamshididana, Zach Miller, Kassandra Hernandez, Nicolas Gonsalves, Andre Olarra, Elliot Yoo, Jeremy A. Herman, Devin J. Roach   +8 more
wiley   +1 more source

Bending Stiffness of a Continuous Concrete Beam Post-tensioned with Unbonded Tendons

Nordic Concrete Research
The ratio of bending stiffnesses at different critical points in the continuous prestressed concrete beam exerts an influence on the redistribution of internal forces, generally moment from support to field.
Nakari Tarja, Laaksonen Anssi
doaj   +1 more source

Encoding Magnetic Anisotropies in Digital Light Processing 3D Printing

Advanced Functional Materials, EarlyView.
A hybrid magnetic device—combining a coaxial coil within a nested Halbach array—is presented, integrated into a DLP 3D printer to enable spatially resolved magnetic field control. This system enables complex, multimodal responses by programming liquid crystal elastomer resins for magnetic and thermal actuation, and by inducing electrically conductive ...
Eléonore Aïdonidis, Andrea Cosola, Pierre Bourdon, Hichem Dammak, Marco Sangermano, Frédéric Demoly, Marco Faustini, Amélie Pérot, Didier Lairez, Rakine Mouhoubi, Sébastien Blanquer, Giancarlo Rizza   +11 more
wiley   +1 more source

Photothermal Macroporous Lignin Cryogels for Off‐Grid, Continuous Atmospheric Water Collection via Interlayer Heat Recovery

Advanced Functional Materials, EarlyView.
Photothermal, macroporous lignin‐based cryogels are engineered to convert sunlight into low‐grade heat. Integrated as stacked beds in a drum‐type device, a thin copper interlayer transfers waste heat between beds, enabling interlayer heat recovery and continuous solar cycling.
Jie Yan, Jiqing Lu, Tian Bai, Lin Li, Zhaoxuan Niu, Yiying Yue, Wanli Cheng, Guangping Han, Orlando J. Rojas   +8 more
wiley   +1 more source

All‐Aqueous Pullulan Fibers Enabling Visible‐to‐Near‐Infrared Waveguiding with Mechanical and Thermal Resilience

Advanced Functional Materials, EarlyView.
Pullulan, a biomass‐derived polysaccharide, is transformed into transparent optical fibers using a solvent‐free borax hydrogel‐spinning method. The fibers outperform PMMA with ≈200 MPa tensile strength and 200 °C stability, while uniquely guiding visible‐to‐NIR light and enabling additive‐free humidity sensing.
Yuya Fukata, Aayush Kumar Jaiswal, Ari Hokkanen, Hannes Orelma, Tadahisa Iwata   +4 more
wiley   +1 more source