Results 1 to 10 of about 2,667,782 (341)

Experimental testing of irradiated engine oil using an e-beam [PDF]

open access: yesScientific Reports, 2023
Engine oil forms a complex system with a number of features. These features consist of hydrocarbons, various natural, or synthetic polymers. The irradiation of polymers becomes an integral part of modern industry.
Martin Zachar, Jan Furch
doaj   +2 more sources

Optimization, characterization, and GC-MS analysis of recycled used engine oil by solvents and adsorbent extraction [PDF]

open access: yesScientific Reports
Recycled engine oil was produced from used engine oil (15W-40) using a combination of MEK and 1-butanol solvents with an activated carbon adsorbent through the adsorption process. The experimental design matrix was prepared using Box-Behnken design (BBD)
Negasa Abdena Alemu   +2 more
doaj   +2 more sources

An Experimental Study on Producing a Sustainable Diesel-like Fuel from Waste Engine Oil [PDF]

open access: yesRenewable Energy Research and Applications, 2020
Used engine oil is one of the most environment pollutants that is produced in large quantities. Methods of recycling and reuse of the oil are important for sustainable environment.
E. Bani-Hani   +5 more
doaj   +1 more source

Deterioration in Physical Engine Oil Properties after Different Trip Length

open access: yesKurdistan Journal of Applied Research, 2021
Fresh engine oils or engine lubricants lose some of their properties during service, engine lubricant deterioration leads to change in oil properties, which ultimately have effect on engine overall performance.
Dana Kareem Hameed
doaj   +1 more source

Feasibility Study on Shear Horizontal Surface Acoustic Wave Sensors for Engine Oil Evaluation

open access: yesSensors, 2020
On site monitoring of engine oil is required. The features of a shear horizontal surface acoustic wave (SH-SAW) sensor include simultaneous detection of mechanical and electrical properties of liquids (such as viscosity, relative permittivity, and ...
Saya Kobayashi, Jun Kondoh
doaj   +1 more source

Investigating the potential of using tannery process solid hair waste for spent engine and vegetable oils removal from water and toxicity assessment using maize

open access: yesCase Studies in Chemical and Environmental Engineering, 2023
Contamination of water and soils by oil is becoming one of the most dangerous pollution problem to handle due to oil toxicity to aquatic organisms, degradation of soil quality and effect on human health.
Cornelius Tsamo   +3 more
doaj   +1 more source

Thermal Safety Analysis of On-Site Emulsion Explosives Mixed with Waste Engine Oil

open access: yesEnergies, 2022
The study of the thermal safety of emulsion explosives mixed with waste engine oil is very important for the safety of these types of explosives used in mine blasting.
Weibo Sun   +3 more
doaj   +1 more source

Contamination of engine oils during winter vehicle operation

open access: yesВестник СибАДИ, 2022
Introduction. The reliability and service life of an engine is largely dependent on the quality of the engine oil. Without oil at the proper level of performance, an internal combustion engine can suffer from wear and tear, which in many cases can lead ...
S. V. Korneev   +3 more
doaj   +1 more source

Removal of Used Engine Oil by a Novel Lab Scale Bioreactor

open access: yesJournal of Pure and Applied Microbiology, 2020
Engine oil is considered as one of the most important classes of environmental contaminant. Removal of dumped waste engine oil is a challenging task because of its persistent nature in the ecosystem.
Dhanya V.
doaj   +1 more source

Verification Measurement of Laboratory Test Equipment for Evaluation of Technical Properties of Automotive Oil Filters

open access: yesApplied Sciences, 2021
By simulating the operating conditions, it is possible to verify and evaluate the technical properties of motor vehicle oil filters and the functionality of the designed equipment.
Ľubomír Hujo   +5 more
doaj   +1 more source

Home - About - Disclaimer - Privacy