Results 201 to 210 of about 90,050 (310)

Large‐Area Printed PEDOT:PSS Shielding and Frequency Selective Surface (FSS) on Textiles

open access: yesAdvanced Materials Interfaces, EarlyView.
An all‐polymer e‐textile frequency selective surface (FSS) can present controlled shielding, presenting a competitive alternative to metal‐based inks. The results show how PEDOT: PSS‐based e‐textiles could be applied in RF devices for future wearable applications.
Benjamin King, Mahmoud Wagih
wiley   +1 more source

Parallel Electrical Integration of Photo Bio Electrochemical Systems (photo‐BESs): Performance Gains and Load Dependency

open access: yesAdvanced Materials Technologies, EarlyView.
Parallel wiring of bioelectrochemical devices with conventional generators unexpectedly boosts output. A biophotovoltaic paired with a solar cell delivers up to 50% more power at low loads than their separate contributions; a plant microbial fuel cell shows similar current gains.
Valeria Marsaglia   +4 more
wiley   +1 more source

End‐to‐End Sensing Systems for Breast Cancer: From Wearables for Early Detection to Lab‐Based Diagnosis Chips

open access: yesAdvanced Materials Technologies, EarlyView.
This review explores advances in wearable and lab‐on‐chip technologies for breast cancer detection. Covering tactile, thermal, ultrasound, microwave, electrical impedance tomography, electrochemical, microelectromechanical, and optical systems, it highlights innovations in flexible electronics, nanomaterials, and machine learning.
Neshika Wijewardhane   +4 more
wiley   +1 more source

Transducers Across Scales and Frequencies: A System‐Level Framework for Multiphysics Integration and Co‐Design

open access: yesAdvanced Materials Technologies, EarlyView.
Transducers convert physical signals into electrical and optical representations, yet each mechanism is bounded by intrinsic trade‐offs across bandwidth, sensitivity, speed, and energy. This review maps transduction mechanisms across physical scale and frequency, showing how heterogeneous integration and multiphysics co‐design transform isolated ...
Aolei Xu   +8 more
wiley   +1 more source

Mechanical Fatigue in Liquid‐Metal Interconnects: Failure Mechanism Analysis and Validation of Improvement Strategies

open access: yesAdvanced Materials Technologies, EarlyView.
Multi‐million cycle reliability for liquid metal stretchable electronics is achieved through a continuous cycle of mechanical testing, failure mode and mechanism analysis and implementing subsequent mitigation strategies. ABSTRACT Stretchable electronics that combine mechanical compliance with reliable electrical performance are essential for ...
Lennert Purnal   +8 more
wiley   +1 more source

The Influence of Mesoscale Particle Structure on the Electrode Degradation and Resultant Electrochemistry of Lithium Ion Cells With Nickel Rich Lithium Nickel Manganese Cobalt Oxide Positive Electrodes

open access: yesAdvanced Materials Technologies, EarlyView.
Milled polycrystalline NMC811 cathode (MPC NMC) with smaller secondary particle and higher surface area had 1) greater cathode tortuosity, 2) reduced surface Ni on the cycled MPC cathodes consistent with surface reconstruction, and 3) increased Ni deposition from cathode‐anode crosstalk, manifesting in lower functional capacity and higher impedance ...
Edelmy J. Marin Bernardez   +22 more
wiley   +1 more source

A Pressure Microsensor Made of Parylene‐C for Use as Medical Implant

open access: yesAdvanced Materials Technologies, EarlyView.
A monolithic parylene‐C pressure sensor with gold strain gauges provides 6.2 μV$\mu{\rm V}$·mmHg$\cdot{\rm mmHg}$−1$^{-1}$ sensitivity. The morphology of a sputtered thin film strain sensor is granular/columnar, which results in a high gauge factor of 7.5. Thermal bonding and parylene‐C coating create a hermetic cavity.
Ann‐Kathrin Klein   +2 more
wiley   +1 more source

Additive‐Manufactured, Multifunctional Bioreactor Technology for Dynamic Culture of 3D Bioprinted Tissue Models

open access: yesAdvanced Materials Technologies, EarlyView.
We introduce an additively manufactured bioreactor with a perfusion flow system and integrated temperature and pH sensors for skeletal muscle tissue biofabrication. The bioreactor's performance was evaluated by assessing the viability, spreading of the myoblast cells in a printed scaffold, and contraction of the isolated murine musculi interossei ...
Lys Sprenger   +9 more
wiley   +1 more source

Home - About - Disclaimer - Privacy