Results 11 to 20 of about 12,865 (309)
Comparative Study on Flow-Accelerated Corrosion and Erosion-Corrosion at a 90° Carbon Steel Bend. [PDF]
Materials (Basel), 2020 Electrochemical measurements and surface analysis are performed to comparatively study flow-accelerated corrosion (FAC) and erosion–corrosion (E-C) behavior at a 90° carbon steel bend.
Zeng L, Chen G, Chen H.
europepmc +2 more sources
Influence of O2 on the erosion-corrosion performance of 3Cr steels in CO2 containing environment. [PDF]
Materials (Basel), 2020 With the introduction of O2 during oil and gas production, the erosion-corrosion rate of tubing steels increases; the objective of this report is to explore the reason for this.
Xia L +5 more
europepmc +2 more sources
Erosion‐Corrosion of Materials in Industrial Equipment: A Review
ChemElectroChem, 2023 Erosion‐corrosion (E−C) is one of the most intense forms of metal degradation observed whenever a static metallic material is in contact with dynamic liquid.
Prof. Dr. Padmalatha Rao +1 more
doaj +1 more source
Erosion-Corrosion of Gathering Pipeline Steel in Oil-Water-Sand Multiphase Flow
Metals, 2022 This work studies a series of factors influencing erosion-corrosion in oilfield gathering pipelines steel using the home-made testing pipe flow loop. Results showed that steel was corroded in oil-water flow.
Qiang Li, Bingcheng Liu
doaj +1 more source
Metals, 2020 This paper firstly provides an overview of major efforts made over the past several decades on developing the test apparatus for the study of erosion-corrosion of ferrous-based steels.
Yunze Xu +5 more
doaj +1 more source
Study of accelerated erosion of elbow-shaped connections with corrosion defects
Journal of Petroleum Exploration and Production Technology, 2023 In the later stages of gas field development, corrosion and erosion wear often occur in elbow-shaped connections used for gas transportation.
Biao Yin +4 more
doaj +1 more source
Erosion–corrosion behavior of X65 carbon steel in oilfield formation water
International Journal of Electrochemical Science, 2019 Erosion–corrosion behavior of an X65 steel reducer in oilfield formation water containing quartz sand particles was investigated using circulating loop system and scanning electron microscopy (SEM).
Jingbo Liu, Jihui Wang, Wenbin Hu
doaj +1 more source
Erosion, corrosion and erosion–corrosion of EB PVD thermal barrier coatings [PDF]
Tribology International, 2008 Abstract Electron beam (EB) physical vapour deposited (PVD) thermal barrier coatings (TBCs) have been used in gas turbine engines for a number of years. The primary mode of failure is attributed to oxidation of the bond coat and growth of the thermally grown oxide (TGO), the alumina scale that forms on the bond coat and to which the ceramic top coat ...
Wellman, R. G., Nicholls, John R.
openaire +2 more sources
Journal of Magnesium and Alloys, 2019 The distribution of residual stresses through thickness of 5 mm-thick ME21 magnesium alloy extruded plates was analyzed non-destructively using short-wavelength X-ray diffraction (SWXRD), and the effect of homogenization annealing before extrusion on the
Yong Lian +8 more
doaj +1 more source
Study Synergy Effect on Erosion-Corrosion in Oil Pipes [PDF]
Engineering and Technology Journal, 2008 Steel corrosion and erosion-corrosion have an important role in oil fieldsutilizing steel pipelines. Therefore; in the present work corrosion, erosion anderosion-corrosion tests are studied individually to investigate the interactionbetween corrosion and
Sami Abulnoun Ajeel +1 more
doaj +1 more source