Results 21 to 30 of about 38,408 (225)

Environmental Analysis of High Temperature Solar Heat Pump, Case Study of Hot Water Production System With Weather Conditions of Ahvaz [PDF]

open access: yesJournal of Advances in Environmental Health Research, 2022
Background: The main purpose of this study is to evaluate the energy consumption quality of the hot water production system with weather conditions of Ahvaz.Methods: The related simulation is carried out using Aspen HYSYS software, version 10. Then Aspen
Habib Shoeibi   +4 more
doaj   +1 more source

General methodology for exergy balance in ProSimPlus® process simulator [PDF]

open access: yes, 2012
This paper presents a general methodology for exergy balance in chemical and thermal processes integrated in ProSimPlus® as a well-adopted process simulator for energy efficiency analysis.
Baudet, Philippe   +5 more
core   +2 more sources

The comparison of various gas turbine inlet aircooling methods for various ambient condition trough energy and exergy analysis [PDF]

open access: yes, 2012
The strong influence of climate conditions on gas turbine behavior is well known. During the summer season the output of gas turbines falls to a value that is less than the rated output under high temperature conditions. Cooling the turbine inlet air can
Kaviri, A. Ganjeh   +3 more
core   +1 more source

Exergy analysis of a PWR nuclear steam supply system - II part: a case study [PDF]

open access: yes, 2018
The paper shows the results of the exergetic analysis of the Nuclear Steam Supply System (NSSS) of the MARS Pressurized Light Water Reactor using the theoretical methodology described in the authors’ previous works [1] and [2].
Ferroni, Luisa, Natale, Antonio
core   +1 more source

Energy, exergy and advanced exergy analysis of a milk processing factory [PDF]

open access: yesEnergy, 2018
Abstract Energy, exergy and advanced exergy methods were used to analyse a milk powder production facility. While a conventional energy analysis is used to map the energy flows and to suggest possibilities for process integration through pinch analysis, an exergy analysis identifies the locations and magnitudes of thermodynamic irreversibilities. The
Fabian Bühler   +4 more
openaire   +2 more sources

ANALYSIS OF EXERGY IN NATURAL GAS IN REDUCTION CITY GATE STATION [PDF]

open access: yesمجله مدل سازی در مهندسی, 2010
After compressing and increasing the pressure of natural gas in compress station, it has high exergy pressure. The pressure of natural gas is decreased in reduction station by regulators, but this issue can waste exergy.
سیف الله Sadodin   +2 more
doaj   +1 more source

Analysis and Optimization of Exergy Flows inside a Transcritical CO2 Ejector for Refrigeration, Air Conditioning and Heat Pump Cycles

open access: yesEnergies, 2019
In this study, the exergy analysis of a CO2 (R744) two-phase ejector was performed using a 1D model for both single and double choking conditions. The impact of the back pressure on the exergy destruction and exergy efficiencies was presented to evaluate
Sahar Taslimi Taleghani   +2 more
doaj   +1 more source

Desalination Processes’ Efficiency and Future Roadmap [PDF]

open access: yes, 2019
For future sustainable seawater desalination, the importance of achieving better energy efficiency of the existing 19,500 commercial-scale desalination plants cannot be over emphasized.
Burhan, Muhammad   +3 more
core   +2 more sources

Comparing Exergy Analysis and Physical Optimum Method Regarding an Induction Furnace

open access: yesEnergies, 2021
In order to achieve energy and climate goals, energy and resource efficiency are considered a key measure. Limit-value-oriented methods such as the exergy analysis and the physical optimum method are used to show the limits of efficiency improvement.
Paula Marlene Wenzel   +2 more
doaj   +1 more source

Thermoeconomic approach for the analysis of control system of energy plants [PDF]

open access: yes, 2012
In this paper a thermoeconomic approach is applied to the dynamic model of a Power System in order to investigate the effects of the control system on the primary energy consumption and on the economic costs of the product.
Baccino   +14 more
core   +1 more source

Home - About - Disclaimer - Privacy