Results 91 to 100 of about 527,094 (293)
steel research international, EarlyView.A CALculation of PHAse Diagrams thermodynamic modeling for Fe–Sn–C system is carried out. The model and the developed database can be used to calculate phase diagrams and thermodynamic properties of this system over wide temperature/composition range, and a part of a larger thermodynamic database for steel and alloy system, and effectively used to ...
Won‐Bum Park +2 more
wiley +1 more source
Explosion Cladding of Lead on Steel [PDF]
, 2017 This work deals with explosion cladding of lead on steel. The welded materials and the Semtex S type explosive are characterised. The preparation of the welded materials and the proposed welding assembly are described. The welding parameters, the welding
Ondruška , Jozef +2 more
core
steel research international, EarlyView.The high‐strain‐rate behavior of resistance spot‐welded DP800–DP1000 joints is investigated. Results show that microstructural gradients across BM–HAZ–FZ govern hardness, strain rate sensitivity, and failure modes. While strength increases with strain rate, energy absorption is controlled by ductility, with DP800–DP800 joints showing superior ...
Pankaj Shrivastava, Velaphi Msomi
wiley +1 more source
Explosive welding technique for joining aluminum and steel tubes [PDF]
, 1975 Silver sheet is wrapped around aluminum portion of joint. Mylar powder box is wrapped over silver sheet. Explosion welds silver to aluminum. Stainless-steel tube is placed over silver-aluminum interface.
Wakefield, M. E.
core +1 more source
Effect of the Rolling Process on the Properties of the Mg/Al Bimetallic Bars Obtained by the Explosive Welding Method. [PDF]
Materials (Basel), 2023 Mróz S +6 more
europepmc +1 more source
Structural Concrete, EarlyView.Abstract Precast reinforced concrete segmental linings are frequently used in modern tunneling. In these linings, the longitudinal joints typically have a reduced contact cross‐section and thus often govern the design, particularly in tunnels under high hydrostatic pressure or crossing squeezing or swelling ground with correspondingly high ...
Fabian Morger +2 more
wiley +1 more source
Nanoparticle-enabled phase control for arc welding of unweldable aluminum alloy 7075. [PDF]
, 2019 Lightweight materials are of paramount importance to reduce energy consumption and emissions in today's society. For materials to qualify for widespread use in lightweight structural assembly, they must be weldable or joinable, which has been a long ...
Cao, Chezheng +3 more
core +2 more sources
Explosive welding of aluminium to stainless steel using carbon steel and niobium interlayers
, 2020 This work aimed to study aluminium to stainless steel explosive welds produced using two different interlayers: carbon steel and niobium. The use of each interlayer was analysed and compared microstructurally and mechanically using many characterisation ...
G. Carvalho +4 more
semanticscholar +1 more source
Review of Catenary Icing on High‐Speed Railways: Characteristics, Impact and Countermeasures
High Voltage, EarlyView.ABSTRACT The pantograph–catenary system (PCS) is the only path for electrified railway trains to acquire energy. Catenary icing during winter is a common natural phenomenon, which usually leads to the deterioration of the current quality and severely affects the operational safety of trains.
Zheng Li +7 more
wiley +1 more source
Explosive Welding of Tubular Configurated Joints for Critical Applications [PDF]
, 1985 Explosive welding can provide the answer to problems of permanently joining metals typically used in the aerospace industry. The explosive bonding process is a solid state bonding process enabling material incompatibility problems associated with fusion ...
Hardwick, R.
core +1 more source