Results 241 to 250 of about 23,505 (308)
Polymer Composites, EarlyView.Overview of the holistic engineering lifecycle and core research pillars for wind turbine blades. ABSTRACT This paper reviews recent advancements across the lifecycle of wind turbine blades, focusing on three interconnected areas: advanced composites, structural optimization, and machine learning (ML) diagnostics. In materials, we highlight progress in
Kemal Hasirci +2 more
wiley +1 more source
P-Texture Effect on the Fatigue Crack Propagation Resistance in an Al-Cu-Mg Alloy Bearing a Small Amount of Silver. [PDF]
Materials (Basel), 2018 Hu Y, Liu Z, Zhao Q, Bai S, Liu F.
europepmc +1 more source
Process‐Induced Anisotropy and Fracture Behavior of Pellet‐3D Printed PLA and PLA/Flax Biocomposites
Polymer Composites, EarlyView.Fused Granular Fabrication of PLA and PLA/flax biocomposites, followed by tensile testing and fracture surface analysis to evaluate the effects of raster orientation and layer number on anisotropy and fracture behavior. ABSTRACT Fused granular fabrication (FGF) enables cost‐effective, large‐scale polymer additive manufacturing; however, the mechanical ...
Fernando Ancio +2 more
wiley +1 more source
Polymer Composites, EarlyView.Characterisation of glass fibre reinforced acrylic with acrylic‐tailored or multi‐compatible sizing agents. ABSTRACT Fiber‐reinforced infusible acrylic monomer resins are of interest as recyclable alternatives to epoxy and other thermoset resin composites, but the novelty of these resins causes published studies on acrylic‐matrix composites to often ...
Machar Devine +3 more
wiley +1 more source
Polymer Composites, EarlyView.High‐Performance Sustainable Ski Core Bio‐Composite Derived from Bio‐Epoxy and Sisal Sibers Systems. ABSTRACT In pursuit of sustainable and high‐performance materials, this work investigates the potential of Algerian sisal fibers as renewable reinforcements in bio‐epoxy composites.
M. A. Kacem +4 more
wiley +1 more source
Polymer Engineering &Science, EarlyView.Experimental and numerical framework for characterizing the thermomechanical response of polylactic acid fabricated by fused filament fabrication. ABSTRACT This study investigates the thermomechanical response of polylactic acid (PLA) specimens fabricated by fused filament fabrication (FFF) at two nozzle temperatures (190°C and 230°C), while mechanical
B. Hanželič +3 more
wiley +1 more source
Research on Simulation of Fatigue Crack Growth in LNG Storage Tanks and Prediction of Residual Service Life. [PDF]
Materials (Basel)Zhang Q, Yi X, Li Z, Zhou W, Liu J.
europepmc +1 more source
Polymer Engineering &Science, EarlyView.Styrene‐butadiene rubber/aramid nanofiber composites interfacially reinforced with glycidyl methacrylate via electron beam irradiation. ABSTRACT Styrene‐butadiene rubber (SBR) is widely used in tire and damping applications, yet its reinforcement with polar nanofillers is often limited by weak interfacial adhesion in nonpolar matrices.
In‐Hee Kim +7 more
wiley +1 more source
Erosion Resistance Enhancement in Epoxy Composites by Recycled Rubber: Effect of Rubber Type
Polymer Engineering &Science, EarlyView.Erosion resistance enhancement in epoxy composites by recycled rubber. ABSTRACT Epoxy‐based materials have low erosion resistance due to their brittle nature, and toughness modification stands out for enhancing it. At this stage, the use of waste rubber as a reinforcement component in the composite system is of interest due to its role in providing ...
Orkan Baran Korkusuz +3 more
wiley +1 more source
Polymer International, EarlyView.IM7/Cycom 5320‐1 unidirectional prepreg has been used to fabricate 64‐layer laminated composites. A custom‐built six‐magnetron microwave applicator and an autoclave were employed to manufacture the composite panels. Mechanical performance of the microwave‐cured composites has been juxtaposed to autoclave‐cured composites in terms of uniaxial tensile ...
Nayan Pundhir +6 more
wiley +1 more source