Results 81 to 90 of about 1,347,772 (277)

HeaTrace: A Parametric Design‐to‐Fabrication Workflow for Thermally Programmable Soft Robots

open access: yesAdvanced Intelligent Systems, EarlyView.
A programmable thermal actuation workflow enables soft robots to be designed and fabricated with embedded heaters that drive multiple responses. By combining performance‐driven heater design with multimaterial fabrication, the system supports thermally triggered shape change, stiffness tuning, and thermochromic visual response, as demonstrated through ...
Naresh Kumar Thanigaivel   +9 more
wiley   +1 more source

Bending behavior of RC beams with Fe-SMA strip reinforcement

open access: yesProcedia Structural Integrity
This paper presents an experimental investigation on reinforced concrete beams with different slenderness strengthened with unbonded Fe-SMA strips. The retrofitting system acts as an external prestressed tendon with a mechanical anchorage. In a first step, the strips are positioned against the concrete bottom surface and fixed against the concrete ...
Michels, Julien   +3 more
openaire   +2 more sources

Fatigue Characteristics of Fe-Based Shape-Memory Alloys

open access: yesApplied Sciences, 2020
This study reports the details of an experimental study of fatigue behavior of two types of Fe-based shape-memory alloys (Fe–SMAs). The two types of Fe–SMAs developed for this study were used to prepare specimens according to ISO 12106 standards.
Ki-Nam Hong   +3 more
doaj   +1 more source

Implantable Systems for Cardiovascular Treatment and Monitoring: Comparative Insights From Intracardiovascular and Extracardiovascular Technologies

open access: yesAdvanced Intelligent Systems, EarlyView.
A unifying device–cardiovascular interface framework is presented to classify implantable cardiovascular technologies as intracardiovascular blood‐contacting systems or extracardiovascular tissue‐only and blood‐handling architectures. Cross‐class comparison across shared semiquantitative criteria, including blood‐contact burden, biomimicry ...
Bergo Nicolò   +7 more
wiley   +1 more source

Comparison of Stress-induced Martensitic Transformation Under Tension and Compression in Fe-28Mn-6Si-Cr Shape Memory Alloy

open access: yesEPJ Web of Conferences, 2018
In the case of the NiTi alloy, some research works reported that the stress-strain curve differs significantly between tension and compression. It is considered that the difference in stress-induced martensitic transformation behavior may be observed ...
Cao Bo, Iwamoto Takeshi
doaj   +1 more source

Lubricant Oil Degradation, Condition Monitoring, and Service Life Estimation: A Review

open access: yesJournal of the American Oil Chemists' Society, EarlyView.
Research framework of the study, integrating lubricant oil degradation, condition monitoring, and service life estimation. ABSTRACT Lubricant oil is often changed on fixed time schedules, even though its real condition depends on load, temperature, and contamination, so good oil is discarded in some cases and degraded oil stays in service in others ...
Laith Shatnawi   +5 more
wiley   +1 more source

Neurovascular coupling in bone regeneration: Mechanisms, advanced biomaterials and challenges

open access: yesBMEMat, EarlyView.
This figure illustrates various material strategies for neurovascularized bone regeneration, including electroactive scaffolds, ion‐loaded materials, drug delivery systems, surface modifications, cells/cell products, growth factors, and peptides. These approaches aim to synergistically promote the regeneration of neural, vascular, and bone tissues ...
Yixin Ma   +8 more
wiley   +1 more source

Cohesive surface model for delamination and dynamic behavior of hybrid composite with SMA-GFRP interface

open access: yesInternational Journal of Lightweight Materials and Manufacture, 2019
The interface model between CuZnAl SMA and GFRP, used in a hybrid composite, is proposed using cohesive surfaces. Using this model and derived parameters, mode-II delamination is studied between CuZnAl SMA insert and GFRP and also between laser patterned
Aaqib Ali   +3 more
doaj   +1 more source

Engineering programmable peptide hydrogels for chronic refractory wounds: A mechanism‐driven framework

open access: yesBMEMat, EarlyView.
To break the self‐perpetuating pathology of chronic wounds, we propose a mechanism‐driven engineering framework for peptide‐based hydrogels. This review elucidates a hierarchical strategy—from molecular design to intelligent, multi‐functional systems—that enables these programmable biomaterials to dynamically intervene in key pathological loops and ...
Xiaoyu Lv   +3 more
wiley   +1 more source

Perspectives on Adhesive–Bolted Hybrid Connection between Fe Shape Memory Alloys and Concrete Structures for Active Reinforcements

open access: yesApplied Sciences
The prestressed active reinforcement of concrete structures using iron-based shape memory alloys (Fe-SMAs) is investigated in this experimental study through three connecting methods: adhesive–bolted hybrid connection, bolted connection, and adhesively ...
Xuhong Qiang   +3 more
doaj   +1 more source

Home - About - Disclaimer - Privacy