Results 161 to 170 of about 864,342 (206)

Ferrite Measurement in Duplex Stainless Steels

CORROSION 2019, 2019
Abstract Duplex stainless steels are a family of corrosion-resistant alloys, which typically contain 50 % austenite and 50 % ferrite. Phase balance is important in duplex stainless steels as it helps to impart optimum mechanical properties and corrosion resistance.
Briony Holmes, Mike Gittos, Michael Dodge, Kasra Sotoudeh   +3 more
openaire   +1 more source

Fabrication of ferritic-austenitic stainless steels

Materials & Design, 1986
Abstract Stainless steels have been developed to give improved weldability and resistance to inter-granular corrosion. Detailed descriptions are given of both the metallurgical properties and recommended welding procedures.
Bertil Larsson, Berthold Lundqvist
openaire   +1 more source

Serrated flow in a ferritic stainless steel

Materials Science and Engineering, 1981
Abstract The Portevin-Le Chatelier effect was analysed by measuring the stress drop Δσ. Russell's assumption that Δσ depends on the aging process as described by Cottrell and Bilby was examined, but no agreement was found between the theory and the experimental results for a ferritic stainless steel.
Erwin Pink, Adolfo Grinberg
openaire   +1 more source

Ferritic Stainless Steels

Abstract This article presents fractographs of ferritic stainless steels that failed by overload and embrittlement.
openaire   +1 more source

Composite of austenitic-ferritic stainless steel

Journal of Materials Processing Technology, 1995
A new precipitation hardening duplex type stainless steel, Mo- and Ni-free, containing 20 Cr, 16 Mn, 2 Si and 0.3 Ti has been developed. The steel possesses a combination of an unusually high strength (Y.S. 600–700 MPa), good ductility and high pitting corrosion resistance after various treatments.
openaire   +1 more source

Recrystallization of ferrite–austenite stainless steel

Metal Science, 1984
AbstractProcesses taking place in the course of annealing of deformed ferrite–austenite stainless steel have been examined by means of light and electron metallography. Deformations of 23, 43, and 85% were obtained by rolling at room temperature. It has been found that ferrite and austenite recrystallize discontinuously irrespective of the magnitude of
openaire   +1 more source

Mechanical twinning in ferritic stainless steels

Scripta Metallurgica, 1982
Magnin, T., Moret, F.
openaire   +2 more sources

Heat Treating of Ferritic Stainless Steels

2014
Abstract Ferritic stainless steels are essentially chromium containing steel alloys with at least 10.5% Cr. They can be grouped based on their chromium content: low chromium (10.5 to 12.0%), medium chromium (16 to 19%), and high chromium (greater than 25%). This article provides general information on the metallurgy of ferritic stainless
openaire   +1 more source

Stainless Steels, Ferritic

2016
M. Cortie, M. du Toit
openaire   +1 more source

Embrittlement of ferrite-austenite and ferrite stainless steels

Metal Science and Heat Treatment, 1965
A. P. Gulyaev, Z. G. Fel'dgandler, L. Ya. Savkina   +2 more
openaire   +1 more source