Results 31 to 40 of about 10,619 (226)

Commissioning and validation of BrainLAB cones for 6X FFF and 10X FFF beams on a Varian TrueBeam STx [PDF]

open access: yesJournal of Applied Clinical Medical Physics, 2013
Small field dosimetry is a challenging task. The difficulties of small field measurements, particularly stereotactic field size measurements, are highlighted by the large interinstitution variability that can be observed for circular cone collimator commissioning measurements.
Wiant, David B.   +4 more
openaire   +2 more sources

Comparative planning of flattening-filter-free and flat beam IMRT for hypopharynx cancer as a function of beam and segment number. [PDF]

open access: yesPLoS ONE, 2014
Although highly conformal dose distributions can be achieved by IMRT planning, this often requires a large number of segments or beams, resulting in increased treatment times.
Yvonne Dzierma   +5 more
doaj   +1 more source

The Evolution of Thermoplastic Raw Materials in High-Speed FFF/FDM 3D Printing Era: Challenges and Opportunities

open access: yesMaterials
The evolution of thermoplastic materials has played a critical role in advancing high-speed Fused Filament Fabrication (FFF) and Fused Deposition Modeling (FDM) 3D printing technologies.
Antreas Kantaros   +3 more
semanticscholar   +1 more source

Melt crystallization of PLA/Talc in fused filament fabrication

open access: yesMaterials & Design, 2019
The fused filament fabrication (FFF) process is characterized by fast local temperature decrease. Such characteristic usually leads to lower crystallinity degree in final printed parts when semi-crystalline polymers are used.
Wangwang Yu   +3 more
doaj   +1 more source

Evaluation of flattening-filter-free and flattening filter dosimetric and radiobiological criteria for lung SBRT: A volume-based analysis

open access: yesFrontiers in Oncology, 2023
IntroductionThe use of volumetric modulated arc therapy (VMAT) with flattening-filter-free (FFF) beams is becoming more prevalent in lung cancer stereotactic body radiotherapy (SBRT).
Junxiang Wu   +4 more
doaj   +1 more source

Experimental Evaluation and Machine Learning-Based Prediction of Laser Cutting Quality in FFF-Printed ABS Thermoplastics

open access: yesPolymers
Additive manufacturing, particularly Fused Filament Fabrication (FFF), provides notable advantages such as design flexibility and efficient material usage.
Gökhan Başar
semanticscholar   +1 more source

On the Strain Rate Sensitivity of Fused Filament Fabrication (FFF) Processed PLA, ABS, PETG, PA6, and PP Thermoplastic Polymers

open access: yesPolymers, 2020
In this study, the strain rate sensitivity of five different thermoplastic polymers processed via Fused Filament Fabrication (FFF) Additive Manufacturing (AM) is reported. Namely, Polylactic Acid (PLA), Acrylonitrile-Butadiene-Styrene (ABS), Polyethylene
N. Vidakis   +5 more
semanticscholar   +1 more source

PLA–Potato Thermoplastic Starch Filament as a Sustainable Alternative to the Conventional PLA Filament: Processing, Characterization, and FFF 3D Printing

open access: yes, 2021
The growing popularity of the fused filament fabrication (FFF) 3D printing technology in science, industry, and in-home use is associated with an increased demand for high-quality polymer filaments.
Agnieszka Haryńska   +4 more
semanticscholar   +1 more source

Thermomechanical Analysis and Numerical Simulations of Fused Filament Fabricated Polylactic Acid Parts

open access: yesMedžiagotyra
This work aimed to investigate the thermal deformation of polylactic acid (PLA) samples 3D-printed by Fused Filament Fabrication. The irreversible thermal strain (ITS) and coefficient of linear thermal expansion (CLTE) of four sets of samples with ...
Irina BUTE   +3 more
doaj   +1 more source

Real-time defect detection for FFF 3D printing using lightweight model deployment

open access: yesThe International Journal of Advanced Manufacturing Technology
FFF 3D printing is one of the most widely used additive manufacturing methods, bringing great convenience to production manufacturing. However, various printing defects may occur during the printing process due to human factors or printer-related issues.
Wenjing Hu   +4 more
semanticscholar   +1 more source

Home - About - Disclaimer - Privacy