Results 21 to 30 of about 2,164 (187)

Laser micro welding with fiber lasers for battery and fuel cell based electromobility

Journal of Advanced Joining Processes, 2022
New challenges are arising within the joining processes in the field of electromobility. Joining highly reflective metals and dissimilar materials such as copper and aluminum – often encountered in battery electrical vehicles – is viewed as a challenging
E Haddad, W.S. Chung, O. Katz, J. Helm, A. Olowinsky, A. Gillner   +5 more
doaj   +1 more source

Research on Heat Source Model and Weld Profile for Fiber Laser Welding of A304 Stainless Steel Thin Sheet

Advances in Materials Science and Engineering, 2018
A heat source model is the key issue for laser welding simulation. The Gaussian heat source model is not suitable to match the actual laser weld profile accurately.
Peizhi Li, Yu Fan, Chonghao Zhang, Zhiyuan Zhu, Wenteng Tian, Anmin Liu   +5 more
doaj   +1 more source

Nanosecond pulsed fiber laser as a tool for laser micro welding

Procedia CIRP, 2020
Abstract Laser micro welding is – due to its local and limited thermal input into the parts – a well suited joining technique for the contacting of battery cells, modules and packs for electrical vehicles. The most common laser micro welding processes employ a fiber laser emitting in the infra-red range in continuous wave mode.
E. Haddad, J. Helm, A. Olowinsky, A. Gillner   +3 more
openaire   +1 more source

Study and Characterization of EN AW 6181/6082-T6 and EN AC 42100-T6 Aluminum Alloy Welding of Structural Applications: Metal Inert Gas (MIG), Cold Metal Transfer (CMT), and Fiber Laser-MIG Hybrid Comparison

Metals, 2020
The present research investigates the effects of different welding techniques, namely traditional metal inert gas (MIG), cold metal transfer (CMT), and fiber laser-MIG hybrid, on the microstructural and mechanical properties of joints between extruded EN
Giovanna Cornacchia, Silvia Cecchel
doaj   +1 more source

MULTIVARIATE OPTIMIZATION OF LASER TRANSMISSION WELDING OF NATURAL FIBER-REINFORCED POLYPROPYLENE [PDF]

Proceedings on Engineering Sciences
This study investigates laser transmission welding of 15 wt% natural fiber-reinforced polypropylene to 0.2 wt% carbon black doped polypropylene using empirical models developed using response surface methodology and the central composite design of ...
Munyaradzi Kapuyanyika , Albert Uchenna Ude , Vivekanandhan Chinnasamy   +2 more
doaj   +1 more source

Robotic Nd:YAG Fiber Laser Welding of Ti-6Al-4V Alloy

Metals, 2017
In the present study, Ti6Al4V titanium alloy plates were joined using a robotic fiber laser welding method. The laser welding process was carried out at two different welding speeds.
Ceyhun Köse, Engin Karaca
doaj   +1 more source

A New Method to Assess Fiber Laser Welding Quality of Stainless Steel 304 Based on Machine Vision and Hidden Markov Models

IEEE Access, 2020
High-power fiber laser welding has a broad range of applications in industrial processing and modern intelligent manufacturing, but how to assess the quality of laser welding has always been a concern. In the welding process, the geometric feature of the
Xin Tang, Ping Zhong, Lingling Zhang, Jun Gu, Zhaopeng Liu, Yinrui Gao, Haowei Hu, Xutong Yang   +7 more
doaj   +1 more source

Investigation of Laser Butt Welding of AISI 304L and Q235 Steels Based on Numerical and Experimental Analyses

Metals, 2022
The fiber laser butt welding of AISI 304L and Q235 low-carbon steel is performed in this study. An integrated heat source combined with an asymmetric double-ellipsoidal heat source and a cylindrical heat source is designed to perform the numerical ...
Yanxi Zhang, Xiangdong Gao, Deyong You, Xiaoming Jiang, Wenjun Ge   +4 more
doaj   +1 more source

Influence of the Overlapping Factor and Welding Speed on T-Joint Welding of Ti6Al4V and Inconel 600 Using Low-Power Fiber Laser

Metals, 2016
Double-sided laser beam welding of skin-stringer joints is an established method for many applications. However, in certain cases with limited accessibility, single-sided laser beam joining is considered.
Shamini Janasekaran, Ai Wen Tan, Farazila Yusof, Mohd Hamdi Abdul Shukor   +3 more
doaj   +1 more source

Guidelines in the Choice of Parameters for Hybrid Laser Arc Welding with Fiber Lasers

Physics Procedia, 2013
AbstractLaser arc hybrid welding has been a promising technology for three decades and laser welding in combination with gas metal arc welding (GMAW) has shown that it is an extremely promising technique. On the other hand the process is often considered complicated and difficult to set up correctly. An important factor in setting up the hybrid welding
Eriksson, Ingemar, Powell, John, Kaplan, Alexander   +2 more
openaire   +2 more sources