Results 211 to 220 of about 2,076 (267)

Dynamic Buckling of Fiber Metal Laminate Column

SSRN Electronic Journal, 2021
The aerospace industry puts forward many requirements for designers in the selection of appropriate materials. They should primarily be characterized by high strength and at the same time low weight. Also, they should not be sensitive to changing weather conditions, be resistant to corrosion and fire, and have high impact strength.
Monika Zaczynska, Radosław Mania
openaire   +1 more source

Micro failure analysis of fiber metal laminates

Journal of Reinforced Plastics and Composites, 2022
In the failure analysis of composite materials, the damage of fiber and matrix is always noticed rather than the debonding of interface which is responsible for transferring the load between matrix and fiber. The stress amplification factors of fiber, matrix, and interface were extracted by establishing representative volume element model with ...
Jiao Lin, Chuanxiang Zheng, Yuchen Dai, Zhenyu Wang   +3 more
openaire   +1 more source

Introduction of nanoclay-modified fiber metal laminates

Engineering Fracture Mechanics, 2017
Abstract In this paper we aim to introduce benefits in modification of epoxy resin of fiber metal laminates (FMLs) with mineral nanoclay platelets. FMLs with carbon fibers and aluminum metal were attached by epoxy resin modified with various amounts of nanoclay.
Afshin Zamani Zakaria, Karim Shelesh-nezhad   +1 more
openaire   +1 more source

The Bearing Strength of Fiber Metal Laminates

Journal of Composite Materials, 2006
The bearing strength, in particular the edge distance sensitivity, of several fiber metal laminates of the GLARE family is experimentally evaluated. The behavior of the fiber layer is investigated in detail to obtain a better understanding of its failure mode. Parallel with these experiments, the bearing behavior is studied using a finite element (FE)
R. G. J. Van Rooijen, J. Sinke, T. J. De Vries, S. Van Der Zwaag   +3 more
openaire   +1 more source

Fatigue crack growth in fiber-metal laminates

Science China Physics, Mechanics and Astronomy, 2013
Fiber-metal laminates (FMLs) consist of three layers of aluminum alloy 2024-T3 and two layers of glass/epoxy prepreg, and it (it means FMLs) is laminated by Al alloy and fiber alternatively. Fatigue crack growth rates in notched fiber-metal laminates under constant amplitude fatigue loading were studied experimentally and numerically and were compared ...
YuE Ma, ZhongChun Xia, XiaoFeng Xiong
openaire   +1 more source

Characterization of long fiber thermoplastic/metal laminates

Journal of Materials Science, 2008
Long fiber thermoplastic (LFT) composite/metal laminate (LML) is a hybrid composite consisting of alternate layers of metals such as aluminum and an LFT composite, which combines advantages from both the constituents. The LFT/Al laminates (LMLs) were processed by compression molding and were characterized for their Young’s modulus, mechanical strength,
R. R. Kulkarni, K. K. Chawla, U. K. Vaidya, M. C. Koopman, A. W. Eberhardt   +4 more
openaire   +1 more source

Dynamic Characterization of a Fiber-Metal Laminate

Key Engineering Materials, 2013
The mechanical strength of a fiber-metal laminate is not so well explored at high strain rates, although its constituents are prone to exhibit such effects. In this paper, we describe an investigation of aluminium-fiber glass material using the Split Hopkinson bar device.
Rafael Celeghini Santiago, Marcilio Alves   +1 more
openaire   +1 more source

Ballistic impact of GLARE™ fiber–metal laminates

Composite Structures, 2003
Abstract Analytical solutions to predict the ballistic limit and energy absorption of fully clamped GLARE panels subjected to ballistic impact by a blunt cylinder were derived. The analytical solutions were based on test results from NASA Glenn. The ballistic limit was found through an iterative process such that the initial kinetic energy of the ...
Michelle S. Hoo Fatt, Chunfu Lin, Duane M. Revilock, Dale A. Hopkins   +3 more
openaire   +1 more source

Electro-Magnetic Forming of Fiber Metal Laminates

Key Engineering Materials, 2019
The paper presents the results of forming rifts in five-layer metal polymer laminates by electro-magnetic forming. During the experimental studies the discharge energy of the electro-magnetic machine was varied in such a way as to achieve different depths of the rift.
Vladimir Glushchenkov, Dmitrii Chernikov, Yaroslav Erisov, Ilia Petrov, Sergei Alexandrov, Li Hui Lang   +5 more
openaire   +1 more source

Effect of Fiber Orientation Angle and Property of Metal Laminate on Impact Behaviors of Fiber Metal Laminates

Transactions of the Korean Society of Mechanical Engineers A, 2003
Impact tests were conducted to study the effect of angle ply and metal laminate on impact damage characteristics of Fiber Metal laminates (FML). Impact tests were conducted using drop weight impact machine and damage behavior were analyzed by comparing with load-displacement curve and surface observation and microscopic observation of cross sections ...
openaire   +1 more source