Results 1 to 10 of about 155,054 (311)
In recent years, high-entropy metal carbides (HECs) have attracted significant attention due to their exceptional physical and chemical properties.
Junhao Zhao +6 more
doaj +1 more source
Polymer-derived ultra-high-temperature ceramic (UHTC) nanocomposites have attracted growing attention due to the increasing demands for advanced thermal structure components in aerospace. Herein, hafnium carbide (HfC) whiskers are successfully fabricated
Yanqin Fu +7 more
doaj +1 more source
Stealth materials with high dependability at elevated temperatures and outstanding mechanical properties are urgently needed for practical applications.
Yao Guo +7 more
doaj +1 more source
Impact properties and water uptake behavior of old newspaper recycled fibers-reinforced polypropylene composites [PDF]
Natural fiber-reinforced thermoplastic composites can be an alternative to mineral fiber-based composites, especially when economic and environment concerns are included under the material selection criteria. In recent years, the literature has shown how
Delgado Aguilar, Marc +5 more
core +2 more sources
The effect of pH value on the corrosion behavior and microstructural evolution of carbon fiber reinforced magnesium matrix (Cf/Mg) composites in NaCl solution were investigated.
Li Yang +5 more
doaj +1 more source
Rational construction of transitional metal oxides electrode materials with suitable structure and composition is an effective strategy of improving their electrochemical performance.
Xuemin Yin +4 more
doaj +1 more source
Natural Fiber Reinforced Polymer Composites [PDF]
1Department of Chemistry, Faculty of Science, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia 2Institute for Chemistry and Technology of Materials, Graz University of Technology, Stremayrgasse 9, 8010 Graz, Austria 3Department of Materials and Metallurgical Engineering, Bangladesh University of Engineering and Technology, Dhaka 1000 ...
Md. Saiful Islam +3 more
openaire +4 more sources
As an alternative to short fibers, non-woven fabrics (NWFs) were made using different types of long fibers to optimize the performance of paper-based friction materials and their technology.
Yewei Fu +5 more
doaj +1 more source
Influence of matrix toughness and interfacial strength on the toughness of epoxy composites with ductile steel fabric reinforcement [PDF]
In the last decades, several studies have been performed on polymers reinforced with steel cords or wires. However, the diameter of these steel reinforcements was still quite large (200 micron and more).
Degrieck, Joris +3 more
core +2 more sources
Recovery in oxidation behavior of damaged SiCZrB2/SiC coating of carbon/carbon composites
Polysiloxane (PSO) was adopted as the matrix of the repair agents, and SiCZrB2 powder was used as the filler, to repair the prefabricated defects on the SiCZrB2/SiC (SZS) coating of carbon/carbon (C/C) composites.
Weiyan Wang, Qiangang Fu
doaj +1 more source

