Results 1 to 10 of about 1,731,795 (99)
Microstructure and properties of MgAlCd filler metal scraped brazing AZ31 magnesium alloy joint
Journal of Materials Research and Technology, 2022 In order to simplify the brazing process of magnesium alloy and make the liquid filler metal rapidly wet the base metal, the phase diagram method was used to design the series of Cd22.8Mg9.2Al and Cd26.3Mg15.3Al series filler metal.
Tuoyu Yang +5 more
doaj +4 more sources
Investigation of the Microstructure and Mechanical Properties of Brazing Joints between Niobium and 316L Stainless Steel using Silver-Copper-Palladium Filler [PDF]
Archives of Metallurgy and Materials, 2023 This paper introduces an approach for vacuum brazing of niobium-316L stainless steel transition joints for application in superconducting radiofrequency cavity helium jackets.
Ruoxu Wang +3 more
doaj +1 more source
Metals, 2021 This study observed the effect of filler metal type on mechanical properties of NAB (NiAl-bronze) material fabricated using wire arc additive manufacturing (WAAM) technology.
Jaewon Kim +3 more
doaj +1 more source
Materials Research Express, 2021 The main objective of this present study is to weld the 316 L stainless steel (SS) joints by gas tungsten arc welding (GTAW) process using nickel coated filler materials.
Aravindkumar D, Thirumalai R
doaj +1 more source
Research on a Low Melting Point Al-Si-Cu (Ni) Filler Metal for 6063 Aluminum Alloy Brazing
Applied Sciences, 2021 A new type of low melting point Al-Si-Cu (Ni) filler metal for brazed 6063 aluminum alloy was designed, and the microstructure and properties of the filler metal were systematically studied.
Chengyin Peng +6 more
doaj +1 more source
Crystals, 2023 Ag-based brazing filler metals are preferred in many industries, but the high price of Ag restricts their wider application. Therefore, developing novel low-Ag brazing filler metals has aroused extensive interest. In this study, the effects of the In and
Junqian Zhang +4 more
doaj +1 more source
Study on Novel Powder Metallurgy Al-Si Brazing Filler Metal with Flux
Crystals, 2022 Green brazing is one of the key basic technologies in the manufacturing industry, and the wide application of composite brazing filler metals is a significant method for realizing green and automatic brazing.
Wenpan Fei +7 more
doaj +1 more source
The effect of oxygen pressure in active brazing 8YSZ and Crofer 22H alloy
Journal of Materials Research and Technology, 2021 The study focused on the effects of oxygen pressure on active brazing of 8YSZ and Crofer 22H alloy using Ticusil filler metal. The presence of oxygen had a strong effect on the bonding mechanism at the interface between the 8YSZ and the Ticusil filler ...
Liang-Wei Huang +2 more
doaj +1 more source
Influences of Groove Angles and Filler Metals on 304L Stainless Steel to AISI 1040 Carbon Steel Dissimilar Joint by Gas Tungsten Arc Welding [PDF]
E3S Web of Conferences, 2019 Dissimilar joint commonly applied on pressure vessel application in power plan field as joining between the tank and the stanchion of pressure vessel. This paper presents the investigations carried out to study the influence of groove angles and filler ...
Wahyu Restu Widodo Eriek +3 more
doaj +1 more source
Nanomaterials, 2021 Nanostructured metal mesh structures demonstrating excellent conductivity and high transparency are one of the promising transparent conducting electrode (TCE) alternatives for indium tin oxide (ITO).
John Mohanraj +4 more
doaj +1 more source