Results 21 to 30 of about 21,475 (263)
Consumable electrode – additional filler wire arc interaction control under surfacing (DE-GMAW)
Advanced Engineering Research, 2021 Introduction. Arc surfacing through feeding an additional filler wire heated by an additional arc burning between the filler wire and the electrode wire is considered.
S. S. Poloskov +2 more
doaj +1 more source
Metals, 2023 In this work, the effect of a filler wire feed rate was studied with special attention to the proportion of porosity volume in the weld metal, microstructure, and mechanical properties. Butt laser weld joints were created using the Nd:YAG laser.
Maroš Vyskoč
doaj +1 more source
Journal of Materials Research and Technology, 2021 Creep rupture behaviors of dissimilar metal welds (DMWs) between Inconel 617B and 10%Cr martensitic steel with two different filler metals Inconel 617 and 82 were comparatively investigated at 600 °C to study the effect of nickel-based filler metal types
Yu Zhang +9 more
doaj +1 more source
Metals, 2018 This study designed (Ti0.55Cu0.20Zr0.15Ni0.10)1−xSix amorphous alloys based on binary deep eutectics and examined the effect of silicon (Si) on the amorphous forming ability of the filler alloys.
He Gao +5 more
doaj +1 more source
Materials & Design, 2020 Ti33.3Zr16.7Cu50-xNix (x = 0–16.5, at.%) amorphous filler metals were designed to braze Ti6Al4V alloy and 316 L stainless steel (SS). The effect of Ni addition in filler metals on the wettability, joint microstructure evolution and shear strength were ...
Yueqing Xia +6 more
doaj +1 more source
Materials Research Express, 2021 This study investigated a suitable filler metal, diffusion depth of the elements of this filler metal in the base metal, and its effect on the mechanical properties of brazing bonding of sheets with different thicknesses of 304L stainless steel. For this
Hedayat Mohammad Soltani, Morteza Tayebi
doaj +1 more source
Journal of Materials Research and Technology, 2021 Dissimilar TC4 titanium alloy and 316L stainless steel were successfully joined utilizing thermoplastic bonding (TPB) with a Ti-based bulk metallic glass (BMG) as the filler.
K.W. Dong +4 more
doaj +1 more source
Realizing the air brazing of ZrO2 ceramics through Al metal
Journal of Materiomics, 2022 The exploration towards cost-effective filler metal for ceramics joining has always been the key issues for ceramics joining. Herein, we reveal that the Al metal prefers to spread on the ZrO2 based ceramic under the air heating condition, due to the ...
Yaotian Yan +6 more
doaj +1 more source
Metals, 2020 The joining methods of Aluminum matrix composites reinforced with SiC particles (SiCp/Al MMCs) are a challenge during the manufacturing process due to the significant differences between SiC particles and base aluminum in terms of both physical and ...
Dechao Qiu +4 more
doaj +1 more source
Metals, 2018 Ti3Al-Nb alloy (Ti-24Al-15Nb) was welded by a pulsed laser welding system without and with pure Nb filler metal. The results indicated that pure Nb filler metal had profound effects on the microstructures and mechanical properties of the laser-welded ...
Lin Wang +4 more
doaj +1 more source