Results 1 to 10 of about 6,094,125 (298)
Influence of Fines Content and Pile Surface Characteristics on the Pullout Resistance Performance of Piles. [PDF]
In this study, the direct shear test and model pullout test results are presented to assess the impact of soil fines content and shear resistance characteristics of the pile–soil interface on the pullout resistance of drilled shafts.
You S, Lee K, Hong G.
europepmc +2 more sources
This study investigates the valorization of fines derived from thermomechanical pulp and made hydrophobic by enzymatic treatment to fabricate thermo-pressed specimens with reduced surface roughness and enhanced hydrophobicity.
Gary Chinga-Carrasco +3 more
doaj +1 more source
FALL CONE TEST CALIBRATION FOR SLOPE STABILITY ANALYSIS
Undrained shear strength is considered as an essential factor to assess the stability of natural slopes and embankments. Traditionally, this parameter is determined through laboratory tests, which are often costly and time-consuming.
Chalabi Youssouf +3 more
doaj +1 more source
To investigate the influence of fine aggregates on the deformation characteristics of graded crushed stone,a modified prediction model was established based on revealing the effects of fines content (Fc),fines-to-sand ratio (Dr),and plasticity index (PI)
Zhenzheng LIU +5 more
doaj +1 more source
Laboratory evaluation of capillary rise in silty sands with geotextile
Capillary rise of water in soil from a groundwater table is commonly observed in soils with fines. The capillary rise increases moisture in subgrade and base course with fines, thus affecting roadway performance.
Mozaher Ul Kabir +3 more
doaj +1 more source
Effect of fines contents on uplift behavior of underground structures in liquefiable ground
Research on liquefaction began decades ago, with clean sand being the main material . Recently, as it has been proven that fines-containing materials are also suspected to be liquefied, additional studies, mainly elementary tests, have been conducted ...
Fernaldy Sebastian Santoso +1 more
doaj +1 more source
The correction factor of Monterey No. 0/30 sample with fines content liquefaction resistance between cyclic triaxial and cyclic hollow cylinder tests. [PDF]
Liu J, Chen G.
europepmc +1 more source
"DEVELOPMENT OF WOOD GRINDING 5. FINES CONTENT–TO–SHIVES RATIO "
"Data by Riissanen were largely applied to learn more about wood grinding and, particularly, possible effects of the moisture content in spruce wood, varying from 65 to 15%, which in terms of moisture ratio covers a range from 1.9 to 0.2 kg water per kg oven dry wood.
openaire +1 more source
Aggregate gradation is one of the most important property that influence the behaviour of roller-compacted concrete pavement (RCCP). There are some limitations for gradation of coarse and fine aggregates from the standards.
Mohammad Hashemi +3 more
doaj +1 more source
Transitional behavior of calcareous sand with different clay contents
Calcareous sand with fines content was often encountered in offshore and onshore engineering. However, most previous research has primarily focused on the mechanical properties of clean calcareous sand.
Hongyi Zhao +8 more
doaj +1 more source

