Results 21 to 30 of about 2,004,002 (204)
Low NO x Combustion of DME by Means of Flue Gas Recirculation
Journal of Power and Energy Systems, 2007 This study focuses on the fundamental characteristics of DME (Dimethyl Ether) combustion aiming at development of low- NO x combustion technology with flue-gas recirculation, FGR. The flue gas is recirculated into the combustion chamber to reduce the O2 concentration and to suppress the combustion gas temperature and the concentration of O2, so that NO
MATSUMOTO, Ryosuke +3 more
openaire +2 more sources
Advances in Mechanical Engineering, 2018 Due to stringent regulations, there has been considerable effort to reduce NO x emissions. In this study, we numerically investigate the details of NO x reduction in a mid-/large-sized combustion system employing a new novel flue-gas internal ...
Minjun Kwon +4 more
doaj +1 more source
Case Studies in Thermal Engineering, 2023 In order to solve the problem of high CO concentration in the emitted flue gas after adopting the flue gas recirculation technology in the annular shaft kiln, in this paper, the combustion characteristics of calcium carbide gas in swirl burners under the
Le Ye +6 more
doaj +1 more source
Clean Technologies, 2023 The study concerns promising coal-fired power plants that can gain an advantage over traditional options in the context of decarbonization. The calculations show that combined-cycle plants with integrated coal gasification and carbon dioxide ...
Igor Donskoy
doaj +1 more source
SPECIFIC FEATURES OF THE OXYFUEL COMBUSTION CONDITIONS IN A BUBBLING FLUIDIZED BED
Acta Polytechnica, 2016 Oxyfuel combustion is a promising approach for capturing CO2 from power plants. This technology produces a flue gas with a high concentration of CO2.
Pavel Skopec, Jan Hrdlička
doaj +1 more source
Optimization of oxy-fuel circulating fluidized bed combustion system with high oxygen concentration
Energy Reports, 2022 High oxygen concentration oxy-fuel circulating fluidized bed (CFB) combustion technology is a high efficiency and low cost oxy-fuel combustion technology, which also has high potential of optimization and efficiency improvement.
Runjuan Kong +3 more
doaj +1 more source
Numerical investigation of the internal flue gas recirculation system applied to methane powered gas microturbine combustor [PDF]
, 2021 The gas microturbines gain significance in various industry sectors. One of their most crucial advantages is the capability of utilizing variety of fuels. At the same time, the emissions regulations become increasingly strict. This is why there is a need
Modliński, Norbert, Fąfara, Jean-Marc
core +1 more source
Impact of hazardous components on CO2 biofixation from synthetic flue gas using Chlorella sp. JPR-1 in a raceway pond photobioreactor [PDF]
, 2013 This work aimed to investigate the effects of hazardous compounds (NO and SO2) in flue gas on Chlorella JPR-1 growth in a raceway pond photobioreactor at ambient temperature (30 °C) without pH control.
Andri Cahyo Kumoro +5 more
core +2 more sources
Energies, 2020 In this paper, the simulation software EBSILON is used to simulate the reheat units, and the reheat temperature control mode is deeply explored. In the benchmark system, the influence of different load intermediate point temperature on the flue gas ...
Meng Yue, Guoqian Ma, Yuetao Shi
doaj +1 more source
Energies, 2020 The main purpose of this paper is to quantitatively analyze the sensitivity of operating parameters of the system to the thermodynamic performance of an oxyfuel combustion (OC) power generation system.
Zhiyu Zhang +3 more
doaj +1 more source