Results 21 to 30 of about 1,445 (208)
Improving fatigue initiation life of open-hole fibre metal laminates by laser shock peening [PDF]
Journal of Materials Research and TechnologyAlthough drilling open holes in fibre metal laminates reduces weight, it brings potential crack initiation sites. This paper investigates the effect of laser shock peening (LSP) on fatigue performance of open-hole titanium-based carbon-fibre/epoxy ...
Wangfan Zhou +6 more
doaj +2 more sources
Research on the deformation law of ultra-thin fiber metal laminates under the synergistic effect of nano-reinforcement and scale effect [PDF]
Materials & DesignAt present, titanium alloy/carbon fiber reinforced polymer (TA1/CFRP) laminates, representing the latest fourth generation of fiber metal laminates (FMLs), are predominantly applied in the field of aerospace.
Yao Wang +6 more
doaj +2 more sources
Diyala Journal of Engineering Sciences, 2021 The Fiber Metal Laminates (FMLs) was studied and improved the mechanical properties were used for aircraft wing. The FMLs are consisting of metal sheets reinforced with fiber bonded by matrix phase. The FMLs consist of seven layers to produce the Hybrid
Saad Theeyab Faris +2 more
doaj +1 more source
Influence of Nanoparticles on Mechanical Properties of Hybrid Polymer-Layered Fibre Metal Laminates (FMLs) [PDF]
, 2022 Fibre metal laminates (FMLs) are widely recommended composite materials in aerospace and automobile industries due to their lightweight/cost-effective nature and good mechanical properties. Recent studies revealed that incorporation of nanoparticles into
Korla, Srikanth +2 more
core +1 more source
Experimental and numerical investigation of fibre-metal-laminates (FMLs) under free vibration analysis [PDF]
, 2021 The combination of materials between metal alloys and composite materials known as fibre metal laminates (FMLs) has been used for thousands of years to reach better performance requirement.
Mohamad Nazirul Mubin, Merzuki +4 more
core +1 more source
Journal of Industrial Textiles, 2022 The remarkable resurgence of fiber metal laminates (FMLs) is certainly attributed to the hybrid properties inherent to light metals and fibers reinforced polymer (FRP). There are few reports on the role of nano-size reinforcements in these composites. In
S Navid Hosseini Abbandanak +5 more
doaj +1 more source
Bending properties and failure mechanism of fiber rare earth magnesium alloy super hybrid laminates
Journal of Aeronautical Materials, 2021 The fiber metal laminate is mainly used in the fuselage wall board, wing skin and other key parts of the aircraft. The structural parts mentioned above bear a large bending moment during the service, which requires that the fiber metal laminate should ...
ZHAO Zong +4 more
doaj +1 more source
sj-jpg-1-ijd-10.1177_10567895221135054 - Supplemental material for Investigation into a comprehensive forming limit curve considering multi-parameters effects for semi-cured FMLs through uniform pressure loading test [PDF]
, 2022 Supplemental material, sj-jpg-1-ijd-10.1177_10567895221135054 for Investigation into a comprehensive forming limit curve considering multi-parameters effects for semi-cured FMLs through uniform pressure loading test by Meng Zhang, Hasnain Ali Mirza, Ye ...
Meng Zhang (154027) +5 more
core +1 more source
Journal of Industrial Textiles, 2022 Recently, fiber metal laminates (FMLs) have attracted considerable application in many industries due to their outstanding properties. FMLs are hybrid materials that are fabricated by adhesion of thin layers of metals and fiber-reinforced composites.
Reza Eslami-Farsani +4 more
doaj +1 more source
Reviews on Advanced Materials Science, 2023 In the face of fierce competition in the automotive market, severe environmental problems, and the consistent enhancement of consumer demands for vehicle performance, research and development for new automotive materials have increased.
Xiao Hanyue +4 more
doaj +1 more source