Use of Foamed Asphalt and Foamed Bitumen for Recycled Asphalt Mixtures: A Review
Civil Engineering and ArchitectureLuis Villegas +5 more
openaire +1 more source
Influence of foaming water content and mixing temperature on foam asphalt mixtures
, 2021 High air void content and inadequate coating of coarse aggregate particles are major challenges in the application of warm mix asphalt (WMA) using foam asphalt technology. Aggregate particle coating has significant influence on air voids content in foam asphalt mixture and is directly dependent on the volume of foam bitumen in the mixture and ...
openaire +1 more source
Introduction of recycled polyurethane foam in mastic asphalt
Građevinar, 2018 The aim of this paper is to analyse the suitability of recycled polyurethane (PU) foam as a binder modifier in mastic asphalts (MA). The results show that harder bitumen is achieved with an increasing percentage of PU, up to 5 %, when the workability of the sample becomes poor. A MA mix with a 4 % of PU in bitumen was manufactured.
Miguel Ángel Salas +1 more
openaire +2 more sources
The Effect of Hydrated Lime on the Low-Temperature Properties of Foamed Asphalt Mixture (FAM). [PDF]
Materials (Basel)Iwański MM +2 more
europepmc +1 more source
Multi-Parameter Collaborative Optimization of Foamed Asphalt Cold Recycling Mixture Properties. [PDF]
Materials (Basel)Qiu W, Li B, Song Z, Zou X, Hu M, Bi Y.
europepmc +1 more source
Effect of Foamed Binder Characteristics on Warm-Mix Asphalt Performance
, 2014 Warm Mix Asphalt (WMA) has been introduced to produce and place asphalt pavements at lower temperatures as compared to conventional Hot Mix Asphalt (HMA).
Kutay, Muhammed Emın +1 more
core
Ageing Evaluation of Foamed Polymer Modified Bitumen with Bio-Flux Additive. [PDF]
Materials (Basel), 2023 Radziszewski P +11 more
europepmc +1 more source
Historical Development of Asphalt Content Determination by the Ignition Method [PDF]
This study was conducted to develop a reliable, detailed test procedure for determining asphalt cement (AC) content by the ignition method. The goal was to minimize the overall test time as well as technician time, and to produce a test method with ...
Murphy, Nicholas E. +3 more
core
Design and Construction Practices for Full-Depth Reclamation of Asphalt Mixtures with Bituminous and Cementitious Additives. [PDF]
Materials (Basel)Malluru S, Saidi A, Ali A, Mehta Y.
europepmc +1 more source
Micro-Foamed-Based Viscosity Reduction of SBS-Modified Asphalt and Its Physical and Rheological Properties. [PDF]
Polymers (Basel)Cheng P, Cheng A, Li Y, Ma R, Chen Y.
europepmc +1 more source