Results 21 to 30 of about 217 (168)
Applied Sciences, 2020 Foamed bitumen stabilisation is an attractive technology for increasing the use of marginal materials in pavement construction and rehabilitation.
Greg White, Roberto Espinosa
doaj +1 more source
Surface temperature of bitumen sheets in the flat roof structure [PDF]
MATEC Web of Conferences, 2019 This paper deals with the surface temperature problem of flat roofs, where bitumen sheets are used as the final waterproofing layer. Currently it is possible to find defects due to the high surface temperature of the waterproofing layer on flat roofs ...
Plachý Jan, Vysoká Jana
doaj +1 more source
Impact of Recycled Asphalt Pavement on Properties of Foamed Bituminous Mixtures
The Baltic Journal of Road and Bridge Engineering, 2018 In recent years, the use of foamed bitumen technology along with Reclaimed Asphalt Pavement is gaining popularity across the world. The mechanical response of foamed bitumen mixtures containing reclaimed asphalt pavement is significantly influenced by ...
Siksha Swaroopa Kar +3 more
doaj +1 more source
Characteristics of the complex modulus of recycled cold mix with foamed bitumen and recycled concrete aggregate [PDF]
MATEC Web of Conferences, 2019 This article presents research on recycled cold mix with foamed bitumen (MCAS) containing recycled concrete aggregate. The primary concept driving this research was to determine if recycled concrete aggregate (RC) could be used as a substitute for ...
Buczyński Przemysław, Iwański Marek
doaj +1 more source
Usage of foamed bitumen in asphalt mixtures
Engineering Solid Mechanics, 2021 This paper focuses on the application of foamed bitumen technology in the production of asphalt mixtures. This technology replaces the common asphalt binder with foamed bitumen for production of asphalt mixtures. Given the foaming, it is possible to produce asphalt mixture at a lower working temperature.
Hýzl, Petr +2 more
openaire +2 more sources
Buildings, 2020 The paper presents the results of tests of the impact of hydraulic and bituminous binders on the properties of the cold-recycled mixture (CRM). The composition of the cold-recycled mixture includes two types of different binders, i.e., bituminous binder ...
Przemysław Buczyński +2 more
doaj +1 more source
A closer scientific look at foam bitumen [PDF]
Road Materials and Pavement Design, 2016 In the asphalt industry, a substantial interest is observed to find possibilities to reduce the production temperature of asphalt mixtures.
Hailesilassie, Biruk W. +3 more
openaire +2 more sources
The water resistance of a recycled base with foamed bitumen in the aspect of road binder composition
Budownictwo i Architektura, 2016 The paper describes research results of recycled base which was performed in a cold deep recycling technology with foamed bitumen and different type of hydraulic mixed binder in the aspect of water resistance.
Przemysław Buczyński +2 more
doaj +1 more source
Long-Term Performance of Pavement Structures with Cold In-Place Recycled Base Course
The Baltic Journal of Road and Bridge Engineering, 2021 Properly designed and maintained asphalt pavements operate for ten to twenty-five years and have to be rehabilitated after that period. Cold in-place recycling has priority over all other rehabilitation methods since it is done without preheating and ...
Audrius Vaitkus +4 more
doaj +1 more source
Budownictwo i Architektura, 2014 The aim of the study was to analyze the properties of foamed bitumen produced from 50/70 bitumen in terms of the assessment of its usefulness to the road construction materials. In order to improve the foaming parameters the synthetic wax Fischer-Tropsch
Anna Chomicz-Kowalska
doaj +1 more source