Results 21 to 30 of about 609 (204)
Usage of foamed bitumen in asphalt mixtures
Engineering Solid Mechanics, 2021 This paper focuses on the application of foamed bitumen technology in the production of asphalt mixtures. This technology replaces the common asphalt binder with foamed bitumen for production of asphalt mixtures. Given the foaming, it is possible to produce asphalt mixture at a lower working temperature.
Hýzl, Petr +2 more
openaire +2 more sources
Buildings, 2020 The paper presents the results of tests of the impact of hydraulic and bituminous binders on the properties of the cold-recycled mixture (CRM). The composition of the cold-recycled mixture includes two types of different binders, i.e., bituminous binder ...
Przemysław Buczyński +2 more
doaj +1 more source
The water resistance of a recycled base with foamed bitumen in the aspect of road binder composition
Budownictwo i Architektura, 2016 The paper describes research results of recycled base which was performed in a cold deep recycling technology with foamed bitumen and different type of hydraulic mixed binder in the aspect of water resistance.
Przemysław Buczyński +2 more
doaj +1 more source
Long-Term Performance of Pavement Structures with Cold In-Place Recycled Base Course
The Baltic Journal of Road and Bridge Engineering, 2021 Properly designed and maintained asphalt pavements operate for ten to twenty-five years and have to be rehabilitated after that period. Cold in-place recycling has priority over all other rehabilitation methods since it is done without preheating and ...
Audrius Vaitkus +4 more
doaj +1 more source
Budownictwo i Architektura, 2014 The aim of the study was to analyze the properties of foamed bitumen produced from 50/70 bitumen in terms of the assessment of its usefulness to the road construction materials. In order to improve the foaming parameters the synthetic wax Fischer-Tropsch
Anna Chomicz-Kowalska
doaj +1 more source
Advances in Materials Science and Engineering, 2020 The evolution of cold recycling using bitumen stabilisation technology has been supported by progressive research initiatives and best practice guidelines.
K. J. Jenkins +2 more
doaj +1 more source
Stiffness of cold-recycled mixtures under variable deformation conditions in the IT-CY test
Case Studies in Construction Materials, 2023 Stiffness modulus belongs to the most important properties describing the cold-recycled mixtures (CRM) in terms of their usability in road pavement structures. Previous research proved that this property is strongly dependent on the scheme and conditions
Mariusz Jaczewski +2 more
doaj +1 more source
Jurnal Teknik SipilThis study examines the performance of asphalt concrete mixtures using foamed bitumen derived from extracted Buton natural asphalt (Asbuton) in comparison to conventional penetration asphalt (Pen 60/70). The research focuses on evaluating key parameters
Harmein Rahman +5 more
doaj +3 more sources
Structural design of pavements incorporating foamed bitumen mixtures [PDF]
, 2017 This paper presents a rational structural design methodology termed the ‘cumulative damage approach’ for road, port and airport pavements incorporating cold bituminous mixtures with foamed bitumen.
Airey, Gordon, Thom, Nick, Kuna, Kranthi
core +1 more source
Budownictwo i Architektura, 2014 This study attempts to evaluate the influence of two advisable methods for compacting laboratory specimens of road base recycled mixes with foamed bitumen (MCAS) and bitumen emulsion (MCE).
Marek Iwański +4 more
doaj +1 more source