Results 71 to 80 of about 609 (204)
Strength indices of sand reinforced by foamed bitumen
Abstract The purpose of the article is to determine the dependence of the parameters, the strength of sand reinforced by foamed bitumen on the content of organic binder. Tests were carried out by uniaxial compression using a measuring and computing complex.
D Rudgalskiy, V Chusov, A Aleksandrov
openaire +1 more source
Utilizing Experimental Data in a Model‐Free Data‐Driven Method: The Case of Thermal Conduction
ABSTRACT The study at hand investigates the applicability of experimental data within a model‐free data‐driven solver. The heat conduction equation is facilitated and solved by the data‐driven solver without the need for a constitutive law. At first, the results of an artificially created dataset are compared to a finite element solution to assess the ...
Jakob Platen +7 more
wiley +1 more source
The combination of reclaimed asphalt pavement (RAP) and foamed bitumen content (FBC) in bitumen mixtures presents a viable and economically advantageous approach to asphalt pavement construction. This investigation delves into the optimal combinations of
Ali Saleh, László Gáspár
doaj +1 more source
This review summarizes various pre‐ and post‐treatment methods used to enhance hard carbon as an anode material for sodium‐ion batteries. It compares their advantages, limitations, and impact on electrochemical performance, while also highlighting future directions for scalable, high‐performance hard carbon development.
Muetaz Mohammed +2 more
wiley +1 more source
Potential for recycled concrete aggregate stabilisation with bitumen emulsion and foamed bitumen [PDF]
Thesis (MEng)--Stellenbosch University, 2020.ENGLISH ABSTRACT: Bitumen stabilisation is a technology used to improve the strength properties of any aggregate, which is also environmentally friendly.
Mazibuko, Nokuthula Mandy Antonia
core
Organic alkalis as potential additives in hot water flooding for enhancing heavy oil recovery
Abstract Alkali–surfactant–polymer (ASP) flooding is a chemical enhanced oil recovery method; its working mechanisms include mobility control, wettability alteration, and in‐situ emulsification. However, conventional alkalis used in the ASP flooding could cause some serious issues, including scaling, formation damage, and pipe corrosion. In this study,
Xuan Du +12 more
wiley +1 more source
Validation of the New Mix Design Process for Cold In-Place Rehabilitation Using Foamed Asphalt, 2007
Asphalt pavement recycling has grown dramatically over the last few years as a viable technology to rehabilitate existing asphalt pavements. Iowa's current Cold In-place Recycling (CIR) practice utilizes a generic recipe specification to define the ...
core
Mechanical characteristics of foamed bitumen mixtures in Western Australia
Increased popularity of foamed bitumen as a stabilizing agent in recent years has resulted in a necessity of research into the mechanical characteristics of foamed bitumen mixture rather than material itself.
Nikraz, H. +3 more
core
State Road Pavement Maintenance
This paper focuses on a section of the state road D28, Bjelovar northern bypass, Republic of Croatia, which was opened to traffic in 2002. Following the expiration of the 20-year design service life, it was determined that the section required ...
Karolina Vukelić, Sanja Dimter
doaj +1 more source
The Influence of Recycled Materials on Cold Mix with Foamed Bitumen Properties. [PDF]
Buczyński P, Šrámek J, Mazurek G.
europepmc +1 more source

