Results 91 to 100 of about 45,941 (210)

Research on forging forming force in the composite technology of cross wedge rolling (CWR) and forging for universal joint fork

Metalurgija, 2019
In this paper，the forging process of universal joint fork of automobile transmission shaft is simulated and the change of forming force of die forging is studied on the basis of the blank produced by cross wedge rolling (CWR).
J. Y. Xu, B. S. Sun, N. Li
doaj  

Physical modelling and numerical finite element method (FEM) simulation of forging in open die of alloy AIMgSi0,5

Metalurgija, 2016
This paper researches the process of forging in open die of gradual axial-symmetric workpiece made of alloy AIMg-Si0,5. The physical modelling was carried out, for which an original method for physical discretisation and numerical FEM analysis was ...
M. Janjić, M. Vukčević, Z. Jurković, N. Šibalić, S. Savićević   +4 more
doaj  

Orbital forging

, 2008
W artykule omówiono możliwości technologiczne i opisano zastosowanie technologii kształtowania obwiedniowego. Przedstawiono przykłady wykonania odkuwek w różnych procesach technologicznych prasowania obwiedniowego na podstawie wyników prac badawczo ...
Ziółkiewicz, S., Garczyński, Z.
core  

Improving durability of hot forging tools by applying hybrid layers

Metalurgija, 2015
This paper deals with problems relating to the durability of the dies used for the hot forging of spur gears. The results of industrial tests carried out on dies with a hybrid layer (a nitrided layer (PN) + physical vapor deposition (PVD) coating ...
Z. Gronostajski, M. Kaszuba, M. Hawryluk, M. Marciniak, M. Zwierzchowski, A. Mazurkiewicz, J. Smolik   +6 more
doaj  

Hot forging of projectile

, 2019
The project elaborated design of technology production of artillery shell – thick walled component from plain steel 11 503. Based on the research of press forging and calculations, it was proposed to forge with production line which contains two forging ...
Frydrych, Jan
core  

Forging modelling in closed-die forging with flash

, 1995
Bu tezin, veri tabanı üzerinden yayınlanma izni bulunmamaktadır. Yayınlanma izni olmayan tezlerin basılı kopyalarına Üniversite kütüphaneniz aracılığıyla (TÜBESS üzerinden) erişebilirsiniz.Yüksek LisansÖZET Üretim yöntemleri içinde önemli bir yeri olan ...
Altınbalık,
core  

Methods of forging steel

, 2016
Cilj diplomske naloge je predstaviti postopke preoblikovanja jekla, izzive pri kovanju, preoblikovalne stroje primerne za kovanje ter njihovo izbiro pri kovanju.
Hribernik, Damjan
core  

Exploiting Adiabatic Softening for Defect-Free Hot Forging of Ti-6Al-4V Femoral Stems. [PDF]

J Funct Biomater
Tuninetti V, Castro J, Valle R, Garrido C, Oñate A.   +4 more
europepmc   +1 more source

Theoretical Analysis and Numerical Simulation of Ejection Demolding Process Parameters for Large Cylindrical Helical Gears After Die Forging. [PDF]

Materials (Basel)
Zhang A, Fei G, Chen X, Liu Z, Zhou J, Zhang Y, Zhang J.   +6 more
europepmc   +1 more source

Drop forging of pinion

, 2010
KAMENÍK Tomáš: Drop forging of pinion The project has been elaborated within the framework of studies of the subject B 2307 and it presents the lay-out of the technology of the forging – the pinion which is made as the drop forging from the material 14 ...
Kameník, Tomáš
core