Results 61 to 70 of about 566,968 (293)
Additive manufacturing introduces pronounced microstructural and crystallographic anisotropy in Ni‐based superalloys, resulting in orientation‐dependent creep deformation and damage. This review identifies the key microstructural origins of creep anisotropy, examines their influence on dominant deformation mechanisms, and highlights processing ...
Chandan Kumar +3 more
wiley +1 more source
The translaminar fracture toughness of pultruded Glass Fiber Reinforced Polymers (GFRP) is influenced by several factors, including the type of matrix, fiber, the fiber volume ratio, the proportion of plies at each angle and the size of the test ...
Zenghui Zhao +3 more
doaj +1 more source
Size Effect on Fracture Toughness of A508-3 Steel Predicted by Using Beremin Model
Fracture toughness is an important index to characterize the brittle state of reactor pressure vessel (RPV) steel. During the irradiation embrittlement study of RPV steel, small size compact tension (CT) specimens are generally used, because of the ...
ZHOU Henghui;ZHONG Weihua;NING Guangsheng;LIN Hu;YANG Wen
doaj
Microstructural evolution of premium rail steel during flash butt welding (FBW), comparing physically simulated heat‐affected zones with actual weld regions. Thermal cycles induce phase transformations and microstructural heterogeneity that influence weld quality and mechanical performance. These findings provide insights into optimizing FBW parameters
Emmanoelle Cintra da Cunha Araújo +15 more
wiley +1 more source
Mezzo-scopic Analysis of Fracture Toughness in Steels
The cleavage fracture toughness of steels was mezzo-scopically analyzed on the basis of the statistical local fracture criterion approach. The statistical stress criterion at the crack tip region suggests that the cleavage fracture toughness in steels ...
Miyata Takashi, Tagawa Tetsuya
doaj
Waste-based cemented paste backfill (WCPB) sustains long-term high dynamic loads in goafs, making modes I and II fracture toughness (KIC and KIIC) essential indicators for stability assessment.
Gang Duan +9 more
doaj +1 more source
To study the tensile and fracture properties of the specimen under the quasistatic loading, the Brazilian disc splitting method and the notched semicircular bend (NSCB) method were used to test the tensile properties of coal specimens, and the fracture ...
Shuang Gong +3 more
doaj +1 more source
Statistical Study on Fracture Toughness of Ice [PDF]
A method to express the distribution of the eperimental results of fracture toughness o ice was investigated by postulating the Weibull distribution with three parameter.
木村, 宣夫 +4 more
core
Accelerated in situ formation of TiB and TiC in Ti–5Al–2.5Sn–B4C is driven by transient liquid phase formation, which enhances particle reactions and microstructural evolution. This process increases hardness and establishes a coupled relationship between sintering temperature and reinforcement content, strongly influencing porosity in the resulting ...
Fernando. Y. Kojima, Juliano. Soyama
wiley +1 more source
The effect of TiN inclusions on the fracture mechanism of 20CrMnTi steel with lath martensite
This study aims to investigate the effect of TiN inclusions on the fracture mechanism of 20CrMnTi steel with martensite. Size of martensite packets, blocks and TiN inclusions were characterized, and the room-temperature tensile properties, impact ...
Yong Zhu +3 more
doaj +1 more source

