Results 1 to 10 of about 10,509 (217)

Development of an evaluation method for nuclear fuel debris–filtering performance

open access: yesNuclear Engineering and Technology, 2018
Fuel failure due to debris is a major cause of failure in pressurized water reactors. Fuel vendors have developed various filtering devices to reduce debris-induced failure and have evaluated filtering performance with their own test facilities and ...
Joon-Kyoo Park   +2 more
doaj   +3 more sources

A new perspective into molten corium concrete interaction for interpreting Fukushima Dai-Ichi terrace-shaped debris [PDF]

open access: yesScientific Reports
This paper compares open-source volcanic lava images with official TEPCO videos and reports. The fuel debris formation at Fukushima Dai-Ichi Nuclear Power Station (1F) Unit 1 shows similarities to natural lava flows at various volcanoes, including ...
A. P. Pshenichnikov
doaj   +2 more sources

SUBCRITICALITY ESTIMATION BY VIRTUAL NEUTRON CAPTURE METHOD [PDF]

open access: yesEPJ Web of Conferences, 2021
The criticality safety control technique is required for the fuel debris removal from the Fukushima Dai-Ichi Nuclear Power Station which experienced a severe accident.
Mitsuyasu Takeshi, Morimoto Yuichi
doaj   +1 more source

EFFECT OF β ON EFFECTIVE MULTIPLICATION FACTOR IN 1/fβ SPECTRUM RANDOM SYSTEM [PDF]

open access: yesEPJ Web of Conferences, 2021
We investigated the effect of β on effective multiplication factor(keff) in the 1/fβ spectrum random system. The random system was generated by the 1/fβ noise model.
Araki Shouhei   +3 more
doaj   +1 more source

ESTIMATED CRITICALITY LOWER-LIMIT MULTIPLICATION FACTOR OF LOW-ENRICHED URANIUM DIOXIDE-CONCRETE SYSTEM USING THE BOOTSTRAP METHOD [PDF]

open access: yesEPJ Web of Conferences, 2021
The present paper aims to evaluate the estimated criticality lower-limit multiplication factor of fuel debris in a form of uranium dioxide-concrete mixture for a study of criticality control on the fuel debris generated through the molten core concrete ...
Hayashi Takuto   +3 more
doaj   +1 more source

Investigation of the Outflow and Spreading-Solidification Behaviour of Stratified Molten Metal

open access: yesJournal of Nuclear Engineering, 2021
The spreading-solidification behaviour of the stratified molten metals was investigated. This is important in understanding the practical fuel debris distribution spread and solidified in the primary containment vessel (PCV) of Fukushima Daiichi Nuclear ...
Ryo Yokoyama   +4 more
doaj   +1 more source

Artificial libration points in the task of towing space debris by an ion beam [PDF]

open access: yesИзвестия Саратовского университета. Новая серия: Математика. Механика. Информатика, 2021
The work is devoted to the problem of towing space debris from a geostationary orbit to a graveyard orbit by a non-contact method using an ion beam created by the engine of an active spacecraft.
Петухов, Вячеслав Георгиевич   +1 more
doaj   +1 more source

Study on relocation behavior of debris bed by improved bottom gas-injection experimental method

open access: yesNuclear Engineering and Technology, 2021
During the core disruptive accident (CDA) of sodium-cooled fast reactor (SFR), the molten fuel and steel are solidified into debris particles, which form debris bed in the lower plenum.
Chunming Teng, Bin Zhang, Jianqiang Shan
doaj   +1 more source

Development of a numerical simulation method for air cooling of fuel debris by JUPITER

open access: yesMechanical Engineering Journal, 2023
A detailed evaluation for air cooling of fuel debris in actual reactors will be essential in fuel debris retrieval under dry conditions. To understand the heat transfer in and around fuel debris, which is assumed as a porous medium in the primary ...
Susumu YAMASHITA   +3 more
doaj   +1 more source

Study on blockage after downward discharge of the molten metallic fuel with radiographic visualization

open access: yesNuclear Engineering and Technology, 2022
The downward discharge of the molten fuel to the lower structure of the fuel assembly could increase of the pressure drop and degrade of coolability of the assembly.
Min Ho Lee   +2 more
doaj   +1 more source

Home - About - Disclaimer - Privacy