Pulsed laser deposition and characterisation of rare earth doped glass-polymer optical materials [PDF]
, 2012 Tellurite glass is well known for its excellent optical properties in the application of optical fiber and planar waveguide devices, particularly for optical amplifiers. This thesis is focused on the design, fabrication and characterisation of tellurite
Zhao, Zhanxiang
core +6 more sources
Structure-property relationships in glass-reinforced polyamide, part 1: The effects of fiber content [PDF]
, 2006 We present the results of an extensive study of the performance of injection-molded glass-fiber reinforced polyamide 66 with glass content between 0 and 40% and based on two chopped glass products both sized with polyamide compatible sizing.
Thomason, J.L.
core +4 more sources
Efficient near-infrared supercontinuum generation in tellurite holey fiber pumped 320nm within the normal dispersion regime [PDF]
, 2010 We demonstrate the generation of a 1.1-1.7µm supercontinuum in a 1.3m long air suspended-core tellurite holey-fiber with a nominal zero-dispersion wavelength of ~1.38µm. The fiber is pumped at 1.06µm with a 20ps pulsed fiber laser.
Horak, P. +9 more
core +2 more sources
Analysis of glass fiber reinforced cement (GRC) fracture surfaces [PDF]
, 2010 Glass fiber reinforced cement (GRC) is a composite material produced by the union of a cement mortar matrix and chopped glass fibers. Its good mechanical properties deteriorate with time. This phenomenon has been studied performing a tensile test program
Cendón Franco, David Ángel +3 more
core +1 more source
Effect of Glass Fiber Hybridization on the Behavior Under Impact of Woven Carbon Fiber/Epoxy Laminates [PDF]
, 2010 The low-velocity impact behavior was studied in hybrid laminates manufactured by RTM with woven carbon and glass (S2) fabrics. Specimens with different thicknesses and glass fiber content (from 0 to 21 vol.%) were tested with impact energies in the range
Enfedaque Díaz, Alejandro
core +1 more source
High-Q bismuth silicate nonlinear glass microsphere resonators [PDF]
, 2012 The fabrication and characterization of a bismuth-silicate glass microsphere resonator has been demonstrated. At wavelengths near 1550 nm, high-modes can be efficiently excited in a 179 µm diameter bismuth-silicate glass microsphere via evanescent ...
Ding, M. +18 more
core +1 more source
IEEE Photonics Journal, 2012 A wideband spectrum-sliced amplified spontaneous emission (ASE) source operating in 1900-nm region is demonstrated using a newly developed double-clad ytterbium-sensitized thulium-doped fiber (YTF) and a Sagnac loop mirror.
A. Halder +9 more
doaj +1 more source
Failure and impact behavior of facade panels made of glass fiber reinforced cement(GRC) [PDF]
, 2011 GRC is a cementitious composite material made up of a cement mortar matrix and chopped glass fibers. Due to its outstanding mechanical properties, GRC has been widely used to produce cladding panels and some civil engineering elements.
F. Gálvez +7 more
core +1 more source
1880-nm Broadband ASE Generation With Bismuth–Thulium Codoped Fiber
IEEE Photonics Journal, 2012 A broadband amplified spontaneous emission (ASE) generation in 1880-nm region is demonstrated by employing a newly developed single-mode Tm-Bi codoped fiber (TBF) in conjunction with 793-nm pumping for the first time.
A. Halder +9 more
doaj +1 more source
Fibers, 2018 In this paper, we present phase-separated alumina–silica glass-based Er3+-doped optical fibers made by a modified chemical vapor deposition (MCVD) process in combination with a solution doping (SD) technique.
Mukul Paul +6 more
doaj +1 more source