Results 71 to 80 of about 7,660,135 (382)

The effect of grain size on workhardening and superplasticity in Zn/0.4% Al Alloy [PDF]

open access: yes, 1969
Superplasticity*requires, amongst other things, a metal with a grain-size in the range 0.5-5μ. Theories of SP invoking dynamic recovery require that the cell-Size of the substructure for the alloy in question is larger than the SP grain-size, so that ...
Naziri, H., Pearce, R.
core  

Improving grain filling and potential grain size [PDF]

open access: yes, 2012
International ...
Calderini, Daniel   +5 more
openaire   +2 more sources

Grain Growth Behavior of Alumina in Zirconia-Toughened Alumina (ZTA) Ceramics During Pressureless Sintering

open access: yesCrystals
The primary grain size, sintering conditions, and admixtures have a significant impact on the grain growth of alumina ceramics. Three kinds of alumina powders with varying grain sizes and zirconia nanoparticles were selected and configured into five ...
Yi Zhao   +4 more
doaj   +1 more source

Placebo Effect Sizes in Clinical Trials of Knee Osteoarthritis Using Intra‐Articular Injections of Biologic Agents

open access: yesArthritis Care &Research, EarlyView.
Objective Patients with knee osteoarthritis rely on symptomatic treatments, in which up to 75% of the pain reduction can be attributed to the placebo effect. This effect may vary based on treatment type (eg, biologics vs nonbiologic injection) and route of administration (eg, intra‐articular vs topical vs oral).
Johanna M. Borst   +5 more
wiley   +1 more source

Novel sputtering-technology for grain-size control [PDF]

open access: yes, 2004
In this paper, we present a description of a novel high-rate plasma sputtering system that allows the control of grain size in sputtered films. Additionally, the system has the advantage of a better utilization of the target material (around 80% to 90 ...
Grundy, P J   +4 more
core   +1 more source

Effect of Grain Size on Mechanical and Creep Rupture Properties of 253 MA Austenitic Stainless Steel

open access: yesMetals, 2022
The effect of grain size on the mechanical properties and creep rupture of 253 microalloyed (MA) austenitic stainless steel (ASS) was investigated. The cold rolling process with a 53% reduction in thickness was applied to the steel followed by annealing ...
Mochammad Syaiful Anwar   +5 more
doaj   +1 more source

Ageism in Rheumatology: the Healthcare Professional's Perspective

open access: yesArthritis Care &Research, Accepted Article.
Objective Ageism (age‐based stereotypes, prejudice, or discrimination) is prevalent and linked to prolonged disability and reduced lifespan in older adults. Little is known about ageism within rheumatology. This study explores the healthcare professional's (HCP) perception of the care of older adults and how ageist attitudes or perspectives may impact ...
Aaron P. Smith   +4 more
wiley   +1 more source

Dissecting the Genetic Basis of Grain Size and Weight in Barley (Hordeum vulgare L.) by QTL and Comparative Genetic Analyses

open access: yesFrontiers in Plant Science, 2019
Grain size and weight are crucial components of barley yield and quality and are the target characteristics of domestication and modern breeding. Despite this, little is known about the genetic and molecular mechanisms of grain size and weight in barley.
Qifei Wang   +8 more
doaj   +1 more source

Numerical Studies of Influencing Factors on the Homogeneity of the Powder Mixture during the Powder Spreading Process of Powder Bed Fusion–Laser Beam/Metal

open access: yesAdvanced Engineering Materials, EarlyView.
AISI 304L stainless steel powder is mixed with silicon nitride (Si3N4) powder and processed by PBF‐LB/M, allowing partial retention of Si3N4. The numerical approach effectively predicts the Si3N4 powder homogeneity and N content distribution on the powder bed. Recent studies have focused on the alloying of nitrogen (N) in high‐alloy stainless steels by
Yuanbin Deng   +7 more
wiley   +1 more source

Surface microstructural changes of spark plasma sintered zirconia after grinding and annealing [PDF]

open access: yes, 2016
Spark plasma sintered zirconia (3Y-TZP) specimens have been produced of 140 nm 372 nm and 753 nm grain sizes by sintering at 1250 °C, 1450 °C and 1600 °C, respectively.
Akhtar, Farid   +5 more
core   +2 more sources

Home - About - Disclaimer - Privacy