Results 141 to 150 of about 4,910 (216)

Analysis of Corrosion and Wall Perforation in the Heat Exchanger Made of AISI 316L Stainless Steel

Materials and Corrosion, EarlyView.
Elevated passivation temperature is identified as the dominant factor triggering localized corrosion and subsequent perforation of AISI 316L heat exchanger tubes. Electrochemical and complementary characterization results show that the alloy retains high resistance to general, pitting, and intergranular corrosion, indicating that failure primarily ...
Bojana Radojković, Bore Jegdić, Branimir Grgur, Stefan Dikić, Jovanka Pejić, Anđela Simović, Nataša Gajić, Aleksandra Popović   +7 more
wiley   +1 more source

Curvature-Adoptive CNC Machining of Freeform Optics via Dynamic Tangential Toolpath Optimization. [PDF]

Materials (Basel)
Singh RP, Chen Y.
europepmc   +1 more source

Multi‐Method Investigation of Intergranular Corrosion of the Aluminium Alloy EN AW‐2024 With Different Cooling Rates After Solution Heat Treatment—Metallography and Eddy Current Testing

Materials and Corrosion, EarlyView.
The corrosion resistance of heat‐treatable aluminium alloys depends directly on the applied heat treatment. This article discusses the relationship between cooling rate and intergranular corrosion sensitivity. The intergranular corrosion depths were determined by light microscopy of cross‐sections and correlated with both non‐destructive eddy current ...
Hanna Schulz, Andreas Heyn, Saskia Roßberg, Paul Rosemann   +3 more
wiley   +1 more source

Study on D6AC Steel PCBN Hard Turning and Optimization. [PDF]

Materials (Basel)
Liu Y, Huang S, Li R, Cui Z, Zhang Y, Liu C.   +5 more
europepmc   +1 more source

Hydrogen‐Enhanced Stress Corrosion Cracking of Wire Arc Additive Manufactured Inconel 625 Superalloy in NaCl Solution: Mechanism of Synergistic Degradation

Materials and Corrosion, EarlyView.
Hydrogen‐enhanced SCC of WAAM Inconel 625 in 3.5 wt.% NaCl solution. Hydrogen charging reduces passive film stability (lower corrosion potential) and promotes pitting at Laves phase/matrix interfaces. Stress corrosion cracks propagate along Laves‐rich regions, leading to quasi‐cleavage brittle fracture.
Xu Zhang, Jinhong Liu, Gongchen Zhu, Yajie Chu, Dong Wu, Liyi Wang   +5 more
wiley   +1 more source

Influence of repetitive diamond bur use on the trueness and surface roughness of subtractively manufactured PICN restorations. [PDF]

Biomater Investig Dent
Liu X, Cameron AB, Haugli KH, Mougios AA, Heng NCK, Choi JJE.   +5 more
europepmc   +1 more source

Biobased Epoxidized Castor Oil Covalent Adaptable Networks Adhesives Reinforced with Recycled Carbon Fibers

Macromolecular Rapid Communications, EarlyView.
It is reported the design of biobased sustainable, smart, and functional adhesives achieved dispersing recycled carbon fibers into biobased epoxy monomer. ABSTRACT The development of sustainable, smart, and functional adhesives is crucial in advancing environmentally friendly materials.
Alberto Cellai, Rafael Turra Alarcon, Bernhard Sölle, Elisabeth Rossegger, Valentina Casalegno, Milena Salvo, Marco Sangermano   +6 more
wiley   +1 more source

Design and cutting performance analysis of cylindrical gear skiving tool with uniform working rake angle. [PDF]

Sci Rep
Ji J, Wang P, Xue R, Wang T, Xing K, Li J.   +5 more
europepmc   +1 more source

A Novel Two‐Stage Flexible Flow Shop Batch Scheduling Model for Grinding Workshops

Naval Research Logistics (NRL), EarlyView.
ABSTRACT The growing need for data storage in data centers has increased the demand for mechanical hard disks due to their low cost and high reliability. Aluminum substrates are the most popular base plates for mechanical hard disks because of their high hardness and low cost.
Jun Xu, Xuanru Pan, Chao‐Bo Yan, Guo‐Qiang Fan, Zhixin Liu   +4 more
wiley   +1 more source

Experimental Analysis of the Correlation Between Cutting Parameters and Recurrence Measures During End Mill Flute Grinding. [PDF]

Materials (Basel)
Kęcik K, Sałata M.
europepmc   +1 more source